9
<DRC1087>
En
A HARDWARE TOUR
Illustrations are provided in this chapter as a visual introduction to the Drive.
Please Familiarize yourself with these illustrations and refer to them when necessary to complete the
installation and operation of the unit.
Front View
Fig.1
BUSY
PHONES
6
5
4
1
CD-ROM DRIVE
2
3
1
Disc loading slot
Insert the CD-ROM with the label facing up.
PRECAUTIONS ON PLAYING CD SINGLES (8 cm Discs):
¶
When playing CD singles (8 cm discs), always use the adapter for 8 cm discs. Before loading
the disc into the CD-ROM drive unit, be sure to check that it is secured properly by the catches
of the adapter. If discs have been inserted without the adapter by mistake, remove the disc
immediately by pressing the eject button. If the disc does not come out with one press, press
another time.
¶
Use 8 cm disc adapters labeled with the
'
mark (recommended standard product). Do not
use adapters which cause the disc to idle, nor adapters which are bent or curved.
2
Stop (
7
)/Eject (
0
) button
This button is used to eject the disc. When this button is pressed once during playback of an audio
disc, the playback will be stopped, and when it is pressed in stopped condition, the disc will be
ejected.
3
Play (
3
)/Skip (
¢
) button
This is used for direct playback of audio discs. When an audio disc is inserted and this button is
pressed, play status will be reached, and when this button is pressed in play status, the playback
will skip to the next track. Data discs will not be played back.
4
BUSY indicator
This flashes during data access.
5
Volume Control (headphone level)
This is used to adjust the volume level of the headphone jack.
6
Headphone jack (PHONES)
This is a stereo minijack for headphones.
