<CRD3539-A>34
08
Section
En
34
Initial Settings
Adjusting initial settings
Initial settings lets you perform initial set up of
different settings for this unit.
1
FUNCTION
display
Shows the function status.
1 Press
SOURCE
and hold until the unit turns
off.
2 Press
FUNCTION
and hold until
A-PI
appears in the display.
3 Press
FUNCTION
to select one of the initial
settings.
Press
FUNCTION
repeatedly to switch between
the following settings:
A-PI
—
WARN
—
AUX
—
DIMMER
—
ILL.CLR
—
FRT+REAR
Use the following instructions to operate each
particular setting.
• To cancel initial settings, press
BAND/ESC
.
• You can also cancel initial settings by holding
down
FUNCTION
until the unit turns off.
Switching auto PI seek
The unit can automatically search for a different
station with the same programming, even dur-
ing preset recall.
1 Press
FUNCTION
to select
A-PI
.
Press
FUNCTION
repeatedly until
A-PI
appears
in the display.
2 Select
A-PI
on or off with
5
/
∞
.
Pressing
5
/
∞
will switch
A-PI
between on and
off and that status will be displayed (e.g.,
A-PI :ON
).
Switching the warning tone
If the front panel is not detached from the head
unit within five seconds of turning off the igni-
tion, a warning tone will sound. You can turn off
this warning tone.
1 Press
FUNCTION
to select
WARN
.
Press
FUNCTION
repeatedly until
WARN
appears in the display.
2 Select
WARN
on or off with
5
/
∞
.
Pressing
5
/
∞
will switch
WARN
between on
and off and that status will be displayed (e.g.,
WARN :ON
).
1
CRD3539A_Eng 9/21/01 4:44 PM Page 34
