Pioneer HTP-105, Руководство по обслуживанию

Страница: 9 / 12

HTP105/205-SW
9
REAR SECTION
1
POWER indicator
Illuminates RED when the power is being supplied.
2
Subwoofer LEVEL knob
Volume of subwoofer is adjusted with this knob. Turn this
knob clockwise to raise the level.
÷
Starting with “MIN“, turn this knob and raise the volume
slowly. If the unit is turned on with the volume set too high,
it could cause hearing and/or speaker damage. Do not
turn the volume up excessively high. The low frequency
sound is apt to be raised too high since it is less disturbing
and harder to detect than high frequencies. Caution must
be taken here since the amplifier and speaker of the
HTP702-SW, HTP202/302-SW will be clipped when the
output of the amplifier or receiver is increased with the
subwoofer level set to “MAX“.
3
Subwoofer input terminal
(LINE LEVEL INPUT)
Connect SUBWOOFER OUTPUT terminal of the receiver to
this terminal with the accessory RCA cord.
If the output of the receiver connected to this unit is high
or if the output has a low range boosted by the Bass con-
trol, Bass boost, or other means, there may be some sound
distortion even if the level of the unit is lowered. In this
case, lower the output level (Volume, Bass control, Bass
boost) on the receiver side.
6. PANEL FACILITIES
POWER
LINE LEVEL
INPUT
LEVEL
AC120V 60HZ 60W
MIN MAX
1
2 3