Pioneer GM-D8500M, Руководство пользователя

Страница: 9 / 88

Connecting the power
terminal
!
The use of a special red battery and ground
wire RD-223, available separately, is recom-
mended. Connect the battery wire directly
to the car battery positive terminal (
+
) and
the ground wire to the car body.
WARNING
If the battery wire is not securely fixed to the term-
inal using the terminal screws, there is a risk of
overheating, malfunction and injury, including
minor burns.
1 Route battery wire from engine com-
partment to the vehicle interior.
After completing all other amplifier connec-
tions, finally connect the battery wire terminal
of the amplifier to the positive (
+
) battery
terminal.
1
Positive (
+
) terminal
2
Engine compartment
3
Vehicle interior
4
Fuse (30 A) × 2
5
Insert the O-ring rubber grommet into the
vehicle body.
6
Drill a 14 mm hole into the vehicle body.
2 Twist the battery wire, ground wire
and system remote control wire.
Twist
3 Attach lugs to wire ends. Lugs not sup-
plied.
Use pliers, etc., to crimp lugs to wires.
1
Lug
2
Battery wire
3
Ground wire
4 Connect the wires to the terminal.
Fix the wires securely with the terminal
screws.
1
System remote control terminal
2
GND terminal
3
Power terminal
Connecting the units
En
9
English
Section
03