Pioneer GM-A3602, Руководство пользователя

Страница: 12 / 92

Specifications
GM-A5602
Power source
.............................
14.4 V DC (10.8 V to 15.1 V
allowable)
Grounding system ................... Negative type
Current consumption ............ 36 A (at continuous power,
4
W
)
Average current drawn ......... 9.5 A (4
W
for two channels)
15.5 A (4
W
for one channel)
Fuse ................................................ 30 A × 2
Dimensions (W × H × D) ... 348 mm × 60 mm ×
215 mm
Weight .......................................... 2.3 kg (Leads for wiring not
included)
Maximum power output ....... 300 W × 2 (4
W
) / 450 W × 2
(2
W
) / 900 W TOTAL
(BRIDGE)
Continuous power output ... 150 W × 2 (at 14.4 V, 4
W
,
20 Hz to 20 kHz,
≦
1.0 % THD
+N)
450 W × 1 (at 14.4 V, 4
W
BRIDGE 1 kHz,
≦
1.0 % THD
+N)
225 W × 2 (at 14.4 V, 2
W
,
1 kHz,
≦
1.0 % THD+N)
Load impedance ...................... 4
W
(2
W
to 8
W
allowable)
Frequency response
...............
10 Hz to 70 kHz (+0 dB,
–
3 dB)
Signal-to-noise ratio ............... 96 dB (IEC-A network)
Distortion ..................................... 0.05 % (10 W, 1 kHz)
Low pass filter:
Cut off frequency ........... 40 Hz to 500 Hz
Cut off slope .....................
–
12 dB/oct
Bass boost:
Frequency
..........................
50 Hz
Level
.....................................
0 dB/6 dB/12 dB
Gain control:
RCA ...................................... 0.3 V to 6.5 V
Speaker .............................. 3.0 V to 26 V
Maximum input level / impedance:
RCA ...................................... 6.5 V / 22 k
W
Speaker .............................. 26 V / 16 k
W
GM-A3602
Power source
.............................
14.4 V DC (10.8 V to 15.1 V
allowable)
Grounding system ................... Negative type
Current consumption ............ 14.5 A (at continuous power,
4
W
)
Average current drawn ......... 4 A (4
W
for two channels)
6.5 A (4
W
for one channel)
Fuse ................................................ 25 A × 1
Dimensions (W × H × D) ... 238 mm × 60 mm ×
180 mm
Weight .......................................... 1.4 kg (Leads for wiring not
included)
Maximum power output ....... 120 W × 2 (4
W
) / 200 W × 2
(2
W
) / 400 W TOTAL
(BRIDGE)
Continuous power output ... 60 W × 2 (at 14.4 V, 4
W
,
20 Hz to 20 kHz,
≦
1.0 % THD
+N)
180 W × 1 (at 14.4 V, 4
W
BRIDGE 1 kHz,
≦
1.0 % THD
+N)
90 W × 2 (at 14.4 V, 2
W
,
1 kHz,
≦
1.0 % THD+N)
Load impedance ...................... 4
W
(2
W
to 8
W
allowable)
Frequency response ............... 10 Hz to 70 Hz (+0 dB,
–
3 dB)
Signal-to-noise ratio ............... 95 dB (IEC-A network)
Distortion
.....................................
0.05 % (10 W, 1 kHz)
Low pass filter:
Cut off frequency ........... 80 Hz
Cut off slope .....................
–
12 dB/oct
Gain control:
RCA ...................................... 0.3 V to 6.5 V
Speaker .............................. 3.0 V to 26 V
Maximum input level / impedance:
RCA ...................................... 6.5 V / 22 k
W
Speaker .............................. 26 V / 16 k
W
Notes
!
Specifications and the design are subject to
modifications without notice.
!
The average current drawn is nearly the maxi-
mum current drawn by this unit when an
audio signal is input. Use this value when
working out total current drawn by multiple
power amplifiers.
En
12
Appendix
Additional information