Pioneer GM-3400T, Руководство пользователя

Страница: 9 / 96

1
Speaker (Left)
2
Speaker (Right)
One-channel output
1
Speaker (Mono)
Connections when using
the speaker input wire
Connect the car stereo speaker output wires
to the amplifier using the supplied speaker
input wire.
!
Do not connect both the RCA input and the
speaker input at the same time.
1
Car Stereo
2
Speaker output
3
Gray: Right
+
4
Gray/black: Right
*
5
White/black: Left
*
6
White: Left
+
7
Speaker input connector
To speaker input terminal of this unit.
Connecting the power
terminal
!
The use of a special red battery and ground
wire RD-223, available separately, is recom-
mended. Connect the battery wire directly
to the car battery positive terminal (
+
) and
the ground wire to the car body.
WARNING
If the battery wire is not securely fixed to the term-
inal using the terminal screws, there is a risk of
overheating, malfunction and injury, including
minor burns.
1 Route battery wire from engine com-
partment to the vehicle interior.
After completing all other amplifier connec-
tions, finally connect the battery wire terminal
of the amplifier to the positive (
+
) battery
terminal.
1
Positive (
+
) terminal
2
Engine compartment
3
Vehicle interior
4
Fuse (30 A) × 2
5
Insert the O-ring rubber grommet into the
vehicle body.
6
Drill a 14 mm hole into the vehicle body.
Connecting the units
En
9
English
Section
03