Pioneer FH-X700BT, Руководство пользователя

Страница: 5 / 76

WARNING
!
Keep the battery out of the reach of children.
Should the battery be swallowed, consult a
doctor immediately.
!
Batteries (battery pack or batteries installed)
must not be exposed to excessive heat such
as sunshine, fire or the like.
CAUTION
!
Use one CR2025 (3 V) lithium battery.
!
Remove the battery if the remote control is
not used for a month or longer.
!
There is a danger of explosion if the battery is
incorrectly replaced. Replace only with the
same or equivalent type.
!
Do not handle the battery with metallic tools.
!
Do not store the battery with metallic ob-
jects.
!
If the battery leaks, wipe the remote control
completely clean and install a new battery.
!
When disposing of used batteries, comply
with governmental regulations or environ-
mental public institutions
’
rules that apply in
your country/area.
! “
Perchlorate Material
–
special handling may
apply.
See www.dtsc.ca.gov/hazardouswaste/
perchlorate. (Applicable to California,
U.S.A.)
”
Important
!
Do not store the remote control in high tem-
peratures or direct sunlight.
!
The remote control may not function properly
in direct sunlight.
!
Do not let the remote control fall onto the
floor, where it may become jammed under
the brake or accelerator pedal.
Frequently used menu
operations
Returning to the previous display
Returning to the previous list (the folder one level
higher)
1
Press / DIMMER .
Returning to the ordinary display
Canceling the main menu
1
Press
BAND
/ .
Returning to the ordinary display from the list
1
Press
BAND
/ .
Tuner
Basic operations
Selecting a band
1
Press BAND / until the desired band ( FM1 ,
FM2 , FM3 for FM or AM ) is displayed.
Switching preset stations
1
Press
c
or
d
.
!
Select
PCH
(preset channel) under
SEEK
to
use this function. For details about the set-
tings, refer to
SEEK (left/right key setting) on
this page.
Manual tuning (step by step)
1
Press
c
or
d
.
!
Select MAN (manual tuning) under SEEK to
use this function. For details about the set-
tings, refer to
SEEK (left/right key setting) on
this page.
Seeking
1
Press and hold
c
or
d
, and then release.
You can cancel seek tuning by briefly pressing
c
or
d
.
While pressing and holding c or d , you can
skip stations. Seek tuning starts as soon as
you release
c
or
d
.
Storing and recalling stations
for each band
Using preset tuning buttons
1 When you find a station that you want
to store in memory, press one of the preset
tuning buttons (1/
to 6/ ) and hold until
the preset number stops flashing.
2 Press one of the preset tuning buttons
(1/ to 6/ ) to select the desired station.
Switching the display
Selecting the desired text information
1
Press DISP to cycle between the following:
!
BRDCST INFO
(program service name/
song title/artist name)
!
FREQUENCY (frequency)
!
CLOCK (source name and clock)
Notes
!
BRDCST INFO text information will change
automatically.
!
Depending on the band, text information can
be changed.
!
Text information items that can be changed
depend on the area.
Function settings
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select FUNCTION.
3 Turn M.C. to select the function.
Once selected, the following functions can be
adjusted.
BSM (best stations memory)
BSM (best stations memory) automatically stores
the six strongest stations in the order of their sig-
nal strength.
1
Press
M.C.
to turn BSM on.
To cancel, press M.C. again.
LOCAL (local seek tuning)
Local seek tuning lets you tune in to only those
radio stations with sufficiently strong signals for
good reception.
1
Press M.C. to select the desired setting.
FM: OFF
—
LV1
—
LV2
—
LV3
—
LV4
AM: OFF
—
LV1
—
LV2
The highest level setting allows reception of
only the strongest stations, while lower levels
allow the reception of weaker stations.
SEEK (left/right key setting)
You can assign a function to the left and right keys
of the unit.
Select
MAN (manual tuning) to tune up or down
manually or select PCH (preset channel) to switch
between preset channels.
1
Press
M.C.
to select
MAN
or
PCH
.
CD/CD-R/CD-RW and USB
storage devices
Basic operations
Playing a CD/CD-R/CD-RW
1
Insert the disc into the disc loading slot with
the label side up.
Ejecting a CD/CD-R/CD-RW
1
Press
h
.
English
Operating this unit
5
Section
Operating this unit
En
02