2
Install this unit.
1
1
Dashboard
3
Install the unit as illustrated.
1
2
3
4
5
1
Nut
2
Firewall or metal support
3
Metal strap
4
Screw
5
Screw (M4 × 8)
#
Make sure that the unit is installed securely in
place. An unstable installation may cause skipping
or other malfunctions.
4
Attach the trim ring.
1
1
Trim ring
Removing the holder
The procedure is the same as that for Before in-
stalling this unit. For details, refer to
Installation using the screw
holes on the side of the unit
%
Fastening the unit to the factory radio-
mounting bracket.
Position the unit so that its screw holes are
aligned with the screw holes of the bracket, and
tighten the screws at 3 locations on each side.
1
2
4
3
1
If the pawl gets in the way, bend it down.
2
Factory radio mounting bracket
3
Truss (5 mm × 8 mm) screws
4
Dashboard or console
Installing the microphone
Only for FH-X755BT
CAUTION
It is extremely dangerous to allow the micro-
phone lead to become wound around the steer-
ing column or shift lever. Be sure to install the
unit in such a way that it will not obstruct driv-
ing.
Note
Install the microphone in a position and orienta-
tion that will enable it to pick up the voice of the
person operating the system.
When installing the microphone on
the sun visor
1
Install the microphone on the micro-
phone clip.
1
2
1
Microphone
2
Microphone clip
2
Install the microphone clip on the sun
visor.
With the sun visor up, install the microphone
clip. (Lowering the sun visor reduces the voice
recognition rate.)
English
Installation
17
Section
Installation
En
03
Содержание FH-X555UI
