Pioneer FH-P80BT, Руководство по эксплуатации

Страница: 30 / 77

Even though your audio player does not con-
tain a Bluetooth module, you can still control
it from this unit via Bluetooth wireless technol-
ogy using a Bluetooth adapter (sold sepa-
rately).
1
Device name
Shows the device name of the connected
Bluetooth audio player (or Bluetooth adapter).
Connecting a Bluetooth audio
player
!
Before you can use audio players you may
need to enter the PIN code into this unit. If
your player requires a PIN code to establish
a connection, look for the code on the
player or in its accompanying documenta-
tion. Refer to
Entering PIN code for Blue-
tooth wireless connection on page 56.
Using a Bluetooth audio player to
initiate a connection
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select
CONNECTION.
Turn to change the menu option. Press to se-
lect.
3 Turn MULTI-CONTROL to select
BT AUDIO DEVICE.
#
If there is previous connection log in this unit,
you can select the Bluetooth device from
PAIRED DEVICE .
Refer to Connecting a paired Bluetooth audio
player .
4 Use MULTI-CONTROL to select a group.
Push
MULTI-CONTROL
up or down to select a
group.
NOKIA (Nokia)
—
STANDARD (standard)
#
Normally select STANDARD . If the device of
Nokia is not paired to this unit, select NOKIA .
#
Push
MULTI-CONTROL
left or right to display
a group name or an ID.
5 Press MULTI-CONTROL to open the con-
nection.
READY
will be displayed.
This unit is now on standby for connection
from Bluetooth audio player.
#
Push
MULTI-CONTROL
left or right to display
the device name, BD address and PIN code of
this unit.
6 Use your Bluetooth audio player to es-
tablish connection.
PIN code is set to 0000 as the default. You can
change this code in the initial setting. Refer to
Entering PIN code for Bluetooth wireless con-
nection
on page 56.
While connecting,
CONNECTING
is displayed.
If the connection is established, CONNECTED
is displayed.
#
If the connection fails,
ERROR
is displayed. In
this case, try again from the beginning.
Connecting a paired Bluetooth audio
player
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select
CONNECTION.
Turn to change the menu option. Press to se-
lect.
3 Turn MULTI-CONTROL to select
PAIRED DEVICE.
Paired device name will be displayed.
#
Push
MULTI-CONTROL
left or right to switch
the device name, BD address, group name and
group ID.
Operating this unit
En
30
Section
02