12.Yellow
Connect to the constant 12 V supply terminal.
13.Red
Connect to terminal controlled by ignition switch (12 V DC).
14.Orange/white
Connect to lighting switch terminal.
11.Yellow/black
If you use an equipment with Mute function, wire this
lead to the Audio Mute lead on that equipment. If
not, keep the Audio Mute lead free of any
connections.
15.Black (chassis ground)
Connect to a clean, paint-free metal location.
5.Fuse (10 A)
3.AUX jack (3.5 ø)
8.IP-BUS input (Blue)
9.IP-BUS cable
2.Front output
7.Antenna jack
4.USB cable
Connect to separately sold USB device.
1.This product
10.Multi-CD player
(sold separately)
6.Rear output or
Subwoofer output
Use a stereo mini
plug cable to connect
with auxiliary device.
21.Left
22.Right
28.With a 2 speaker system, do not
connect anything to the speaker leads
that are not connected to speakers.
20.Front speaker
20.Front speaker
27.Rear speaker
27.Rear speaker
16.White
18.Gray
19.Gray/black
17.White/black
23.Green
25.Violet
24.Green/black
26.Violet/black
1.5 m
35.Perform these connections
when using the optional
amplifier.
34. Blue/white
Connect to system control terminal of the
power amp or auto-antenna relay control
terminal (max. 300 mA 12 V DC).
31.Connect with RCA cables
(sold separately)
33. System remote control
32.Power amp
(sold separately)
30.To Rear output or
Subwoofer output
29.To front output
20.Front speaker
20.Front speaker
32.Power amp
(sold separately)
36.Rear speaker or
Subwoofer
36.Rear speaker or
Subwoofer
40.When using a subwoofer of 70 W (2
Ω
), be sure to connect with Violet and Violet/black leads of this
unit. Do not connect anything with Green and Green/black leads.
42.Subwoofer
(4
Ω
)
×
2
41.Not used.
38.
Note:
Change the initial setting of this unit (refer to the
Operation Manual). The subwoofer output of this unit is
monaural.
39.Subwoofer (4
Ω
)
39.Subwoofer (4
Ω
)
12.Yellow
Connect to the constant 12 V supply terminal.
13.Red
Connect to terminal controlled by ignition switch (12 V DC).
14.Orange/white
Connect to lighting switch terminal.
11.Yellow/black
If you use an equipment with Mute function, wire this
lead to the Audio Mute lead on that equipment. If
not, keep the Audio Mute lead free of any
connections.
15.Black (chassis ground)
Connect to a clean, paint-free metal location.
5.Fuse (10 A)
3.AUX jack (3.5 ø)
8.IP-BUS input (Blue)
9.IP-BUS cable
2.Front output
7.Antenna jack
4.USB cable
Connect to separately sold USB device.
1.This product
10.Multi-CD player
(sold separately)
37.Subwoofer output
Use a stereo mini
plug cable to connect
with auxiliary device.
21.Left
22.Right
20.Front speaker
20.Front speaker
16.White
18.Gray
19.Gray/black
17.White/black
23.Green
25.Violet
24.Green/black
26.Violet/black
23.Green
25.Violet
24.Green/black
26.Violet/black
1.5 m
34. Blue/white
Connect to system control terminal of the
power amp or auto-antenna relay control
terminal (max. 300 mA 12 V DC).
Fig. 1
圖1
Fig. 2
圖2
