Switching the feature demo
The feature demo automatically starts when
power to this unit is turned off while the igni-
tion switch is set to ACC or ON.
1
Display the initial setting menu.
Refer to
Adjusting initial settings
on page 27.
2
Use MULTI-CONTROL to select
DEMONSTRATION.
3
Press MULTI-CONTROL to turn the fea-
ture demo on.
#
To turn the feature demo off, press
MULTI-CONTROL
again.
Notes
!
Remember that if the feature demo continues
operating when the car engine is turned off, it
may drain battery power.
!
You can also turn on or off feature demo by
pressing
DISP
while this unit is turned off. For
more details, see
About the demo mode
on
page 6.
Switching the ever scroll
When ever scroll is set to on, CD text informa-
tion scrolls continuously in the display. Set to
off if you prefer the information to scroll just
once.
1
Display the initial setting menu.
Refer to
Adjusting initial settings
on page 27.
2
Use MULTI-CONTROL to select
EVER-SCROLL.
3
Press MULTI-CONTROL to turn the ever
scroll on.
#
To turn the Ever Scroll off, press
MULTI-CONTROL
again.
Activating the
BT AUDIO
source
You need to activate the
BT AUDIO
source in
order to use a Bluetooth audio player.
!
You can only operate this function when
Bluetooth adapter (e.g. CD-BTB100) is con-
nected to this unit.
1
Display the initial setting menu.
Refer to
Adjusting initial settings
on page 27.
2
Use MULTI-CONTROL to select
BT AUDIO.
3
Press MULTI-CONTROL to turn the
BT AUDIO source on.
#
To turn the
BT AUDIO
source off, press
MULTI-CONTROL
again.
Entering PIN code for
Bluetooth wireless connection
To connect your cellular phone to this unit via
Bluetooth wireless technology, you need to
enter PIN code on your phone to verify the
connection. The default code is
0000
, but you
can change this in this function.
!
You can only operate this function when
Bluetooth adapter (e.g. CD-BTB100) is con-
nected to this unit.
!
With some Bluetooth audio players, you
may be required to enter the Bluetooth
audio player PIN code in advance to set
this unit for a connection.
1
Display the initial setting menu.
Refer to
Adjusting initial settings
on page 27.
2
Use MULTI-CONTROL to select
PIN CODE INPUT.
3
Push MULTI-CONTROL up or down to
select a number.
4
Push MULTI-CONTROL left or right to
move the cursor to the previous or next po-
sition.
Initial Settings
En
30
Section
04
