Listening to FM/AM
04
15
En
English
Français
Deutsch
Nederlands
Italiano
Español
Improving FM stereo sound
If the
TUNED
or
STEREO
indicator fails to light
when tuning into an FM station due to a weak
reception signal, press the
MPX
button to
switch the tuner into mono reception mode.
1
This should improve the sound quality and
allow you to enjoy the broadcast.
Recalling preset stations
For instructions on presetting stations, see the
section
“Preset stations”
(page 16).
1
Connect the antenna and confirm that
reception is possible.
2
Press the POWER or
button to turn on
the power.
3
Press the MENU button to select menu.
4
Either turn the TUNING/PRESET dial or
press the ST + or ST – button to select the
search mode.
5
Either turn the TUNING/PRESET dial or
press the ST + or ST – button to select
“Preset”.
6
Press the TUNING/PRESET dial or ENTER
button to set the preset mode.
7
Watching the display, either turn the
TUNING/PRESET dial, or press the ST + or
ST – button to select the desired preset
channel.
7-1 Press one of the preset channel range (A
to J) buttons to select the desired memory
block (A to J).
7-2 Press one of the station call (1 to 10)
buttons to select the desired preset channel
(1 to 10).
• Steps 1 to 5 can be skipped when using the
ST +/–
, preset channel range (
A
to
J
) and
station call (
1
to
10
) buttons.
The preset mode is set when any of these
buttons is pressed, regardless of the menu
setting at that time.
Note
1 The
STEREO
indicator will light blue when the MPX button is pressed.
DIMMER
A.PRESET/A.TUNE
TUNE+
TUNE-
ST+
ST-
MEMORY
ENTER
A/B/C
D/E/F
MENU
BAND
MPX
G/H
I/J
1
2
3
4
4
5
6
7
8
10
9
DISP
ON
OFF
POWER
STANDBY
F
3
RDS
TUNED
STEREO
BAND
DISPLAY
AUTO PRESET
MENU
TUNING/PRESET
01_F-F3_EN.book 15 ページ ２００７年９月３日 月曜日 午後１時５７分