12
En
10 stations can be preset in each of the 3 classes, for a
total of 30 station presets.
NOTES:
¶
You can also store MPX MODE and RF ATT settings in
memory.
¶
If a station is memorized with the STATION CALL but-
tons at a position where a station is already memo-
rized, the previous contents are erased and the new
data is stored in memory.
¶
If preset stations get erased, repeat the preset proce-
dures from the beginning.
1
. Tune in the desired station.
For details concerning tuning, refer to “BASIC TUN-
ING OPERATIONS” on P.10 and 11.
2
. Press the MEMORY button.
¶
The MEMORY indicator will light for several sec-
onds.
¶
Memory storage is not possible once the indicator
goes off. In this case, press the MEMORY button
again.
¶
If the button is pressed again while the indicator is
lit up, the memory function will be canceled.
3
. Select the desired class (A to C) with
the CLASS button.
4
. While the MEMORY indicator is lit, press
the desired STATION CALL button.
Pressing a STATION CALL button causes the
MEMORY indicator to go out and the station to be
preset.
A station is preset (memorized) a few seconds after
pressing the STATION CALL button.
5
. Repeat procedure
1
to
4
to memorize
other stations.
PRESET STATIONS
MEMORY
4.
2.
3.
CLASS
5
<Example> Presetting an FM 106.00 MHz
station into Class C with station no. (CH) 5.
4
3
2
MPX MODE
RF ATT
PRESETTING STATIONS
