Pioneer ELITE VSX-LX304 Скачать руководство пользователя страница 72

Страница: 72 / 180

≫

≫

≫

≫

≫

≫

Playing Back on multiple devices (AirPlay2)

This unit supports AirPlay2. If the version of the iOS device is iOS11.4 or later,

you can play the music of the iOS device on this unit and other devices that

support AirPlay2.

Connect the iOS device to the access point where this unit is connected via

network.

2. Tap the AirPlay icon

on the play screen of the music play application on the

iOS device, and select this unit and AirPlay2-supported devices to play from

the displayed devices.

•

AirPlay2-supported devices are displayed with white circle on the right side.

•

Multiple AirPlay2-supported devices can be selected.

•

The volume can be adjusted on individual devices.

Play the music file on the iOS device.

•

If "System Setup" - "Hardware" - "Power Management" - "Network Standby" is

set to "Off " in the Home, manually turn the unit on and then press NET on the

remote controller. In the factory default setting, the Network Standby function

(

p138

) is set to On.

•

Due to the characteristics of AirPlay wireless technology, the sound produced

on this unit may slightly be behind the sound played on the AirPlay-enabled

device.

You can also play the music files on a PC with iTunes (Vere. 12.8 or later)

equipped. Confirm that this unit and the PC are connected to the same network

beforehand. Then, press NET on this unit. Next, click the AirPlay icon in

iTunes, select this unit and AirPlay2-supported devices to play from the displayed

devices, and start play of a music file.

Pioneer VSX-LX304

XXXXXX

iPhone

Pioneer

XXXXXXXX

Pioneer

XXXXXXXX

Wi-Fi

e.g., iOS 11.4

Содержание ELITE VSX-LX304





















































































































































































Результаты поиска

Содержание ELITE VSX-LX304

Отзывы:

Похожие инструкции для ELITE VSX-LX304

Бренды по названию

Популярные бренды

Pioneer ELITE VSX-LX304, Инструкция по эксплуатации

Результаты поиска

Содержание ELITE VSX-LX304

Отзывы:

Похожие инструкции для ELITE VSX-LX304

Бренды по названию

Популярные бренды