En
81
13
Additional information
Important information
regarding the HDMI
connection
There are cases where you may not be able to
route HDMI signals through this receiver (this
depends on the HDMI-equipped component
you are connecting-check with the manufac-
turer for HDMI compatibility information).
If you aren’t receiving HDMI signals properly
through this receiver (from your component),
please try one of the following configurations
when connecting up.
Configuration A
Use component video cables to connect the
video output of your HDMI-equipped compo-
nent to the receiver’s component video input.
The receiver can then convert the analog com-
ponent video signal to a digital HDMI signal for
transmission to the display. For this configu-
ration, use the most convenient connection
(digital is recommended) for sending audio to
the receiver. See the operating instructions for
more on audio connections.
Note
!
The picture quality will change slightly during
conversion.
Configuration B
Connect your HDMI-equipped component
directly to the display using an HDMI cable.
Then use the most convenient connection
(digital is recommended) for sending audio
to the receiver. See the operating instruc-
tions for more on audio connections. Set the
display volume to minimum when using this
configuration.
Note
!
If your display only has one HDMI terminal,
you can only receive HDMI video from the
connected component.
!
Depending on the component, audio output
may be limited to the number of channels
available from the connected display unit (for
example audio output is reduced to 2 channels
for a monitor with stereo audio limitations).
!
If you want to switch the input function, you’ll
have to switch functions on both the receiver
and your display unit.
!
Since the sound is muted on the display when
using the HDMI connection, you must adjust
the volume on the display every time you
switch input functions.
Cleaning the unit
!
Use a polishing cloth or dry cloth to wipe off
dust and dirt.
!
When the surface is dirty, wipe with a soft
cloth dipped in some neutral cleanser diluted
five or six times with water, and wrung out
well, and then wipe again with a dry cloth. Do
not use furniture wax or cleansers.
!
Never use thinners, benzene, insecticide
sprays or other chemicals on or near this unit,
since these will corrode the surface.
Surround sound formats
Below is a brief description of the main sur-
round sound formats you’ll find on BDs, DVDs,
satellite, cable and terrestrial broadcasts, and
video cassettes.
Dolby
The Dolby technologies are explained below.
See http://www.dolby.com for more detailed
information.
Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro Logic”, “Surround
EX” and the double-D symbol are trademarks of
Dolby Laboratories.
DTS
The DTS technologies are explained below.
See http://www.dts.com for more detailed
information.
Manufactured under license under U.S. Patent
#’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,226,616; 6,487,535; 7,212,872; 7,333,929;
7,392,195; 7,272,567 & other U.S. and worldwide
patents issued & pending. DTS and the Symbol
are registered trademarks, & DTS-HD, DTS-HD
Master Audio, and the DTS logos are trademarks
of DTS, Inc. Product includes software.
©
DTS,
Inc. All Rights Reserved.
About iPod
“Made for iPod,” “Made for iPhone,” and “Made
for iPad” mean that an electronic accessory
has been designed to connect specifically to
iPod, iPhone, or iPad, respectively, and has
been certified by the developer to meet Apple
performance standards. Apple is not respon-
sible for the operation of this device or its com-
pliance with safety and regulatory standards.
Please note that the use of this accessory
with iPod, iPhone, or iPad may affect wireless
performance.
Apple, AirPlay, iPad, iPhone, iPod, iPod shuffle,
iPod nano, iPod classic, iPod touch, iTunes and
Mac are trademarks of Apple Inc., registered in
the U.S. and other countries.
Содержание Elite VSX-50
Страница 1: ...VSX 51 VSX 50 ...
