42
memo
If you have a subwoofer and like lots of bass, it may seem logical to select LARGE for your front
speakers and PLUS for the subwoofer. This may not, however, yield the best bass results. Depending
on the speaker placement of your room you may actually experience a decrease in the amount of
bass due to what is called "low frequency cancellations." In this case, arrange the position or direction
of speakers. If you can’t get good results, listen to the bass response with it set to PLUS and YES or
the front speakers set to LARGE and SMALL alternatively and let your ears judge which sounds best.
If you have a subwoofer, the easiest option is to route all the bass sounds to it by selecting SMALL
for the front speakers.
9
2.1. Speaker Systems
Manual Free
” Normal Surround ”
FRONT
[LARGE
]
CENTER
[LARGE
]
SURROUND
[LARGE
]
SURR BACK
[LARGE
X
2]
SUB WOOFER [
YES
]
( NEXT)
3,4
2.1. Speaker Systems
Manual Free
Speaker System Select
[
Normal Surround
]
( Next)
2.1. Speaker Systems
Manual Free
” Normal Surround ”
Crossover [
80Hz
]
Normal Surround
(THX Speaker = 80Hz)
Speaker B : Secound Zone
[Return]
Setting Up for Surround Sound
For MANUAL FREE
, select it and press
ENTER
. Then go
to step 3.
For MANUAL THX
, select it and press
ENTER
. Then go
to step 5.
For AUTO
, select it and press
ENTER
. Be prepared for
loud test tones and make sure the room is free of ambient
noise (see memo page 18). When you see
OK
on the OSD
the setup is finished. Go to step 9.
3
Use the
2
3
buttons to select either
NORMAL SURROUND or FRONT BI-
AMP (5.1).
NORMAL SURROUND:
For normal home theater use.
FRONT BI-AMP (5.1):
Settings for bi-amp (see p.76).
4
Use the
∞
button to go to the next
screen.
5
With the
5∞
buttons choose the set of
speakers that you want to set.
If you selected MANUAL THX in step 2, you can choose
only surround back.
6
Use the
2
3
buttons to choose the size
and number for each set of speakers as
well as LARGE, SMALL, YES, NO or PLUS.
7
Repeat steps 5 & 6 for all speakers
channels.
8
Use the
∞
button to go to the next screen.
9
Use the
2
3
buttons to choose a
Crossover Frequency of 50 Hz, 80 Hz,
100 Hz, 150 Hz or 200 Hz.
Certain bass sounds will play back from the subwoofer if
you selected it as YES (or PLUS) or from the front speak-
ers if you selected them as LARGE.
This setting decides where the cutoff will be between
those bass sounds playing back from the speaker selected
as above and the bass sounds for the entire soundtrack,
which play back from all speakers used.
If you selected
MANUAL THX
in step 2 the Crossover
Frequency is set to 80Hz and this screen doesn’t appear.
10 Use the
5∞
buttons to select RETURN
and press ENTER.
Next, proceed to CHANNEL LEVEL below.
If you want to change a setting before proceeding
start over from step 1.
2
2.1. Speaker Systems
[
Manual Free
]
[Manual THX]
(all small)
[Auto]
[Return]
2.1. Speaker Systems
Manual Free
” Normal Surround ”
FRONT
[
LARGE
]
CENTER
[LARGE
]
SURROUND
[LARGE
]
SURR BACK
[LARGE
X
2]
SUB WOOFER [ YES
]
( NEXT)
2.1. Speaker Systems
Manual Free
” Normal Surround ”
Crossover [ 80Hz ]
Normal Surround
(THX Speaker = 80Hz)
Speaker B : Secound Zone
[
Return
]
10
7
5
Содержание Elite VSX-49TXi
Страница 1: ...AUDIO VIDEO MULTI CHANNEL RECEIVER VSX 49TXi Operating Instructions ...
Страница 3: ...3 ...
