09
50
En
Controlling the rest of your system
Clearing all the remote
control settings
You can clear all presets and restore the factory
default settings.
1 Press
REMOTE SETUP
and hold for
three seconds.
The LCD display shows
SETUP
.
2 Press any
MULTI CONTROL
button.
3 Use
}
and
]
to select
RESET
then
press
REMOTE SETUP
.
The LCD display shows
OK
.
Erasing one of the remote
control button settings
This erases one of the buttons you have
programmed and restores the button to the
factory default.
1 Press
REMOTE SETUP
and hold for
three seconds.
The LCD display shows
SETUP
.
2 Press the
MULTI CONTROL
button
relating to the button setting to be
erased.
3 Prepare the remote to erase the button
setting.
Use
}
and
]
to select
ERASE
and
then press
REMOTE SETUP
.
The LCD display flashes
PRES KEY
.
4 Press and hold the button to be erased
for three seconds.
The LCD display shows
OK
to confirm the
button has been erased or
NO CODE
if an
error has occurred.
5 Repeat step 4 to erase other buttons.
6 Press and hold the
REMOTE SETUP
button for two seconds to exit.
The LCD display will show
OK
if the
operation has been learned.
If for some reasons the operation hasn’t
been learned the LCD will display
ERROR
for
three seconds and then display
PRES KEY
again. If this happens, keep pressing the
(teaching) button as you vary the distance
between the two remotes, until the LCD
display shows
OK
.
To program additional operations for the
current component repeat steps 4 and 5.
To program operations for another compo-
nent exit and repeat steps 1 through 5.
6 Press and hold the
REMOTE SETUP
button for three seconds to store the
operation(s).
• Some commands from other remote controls
cannot be learned, but in most cases the
remotes just need to be moved closer together
or farther apart.
• Certain buttons represent operations that
cannot be learned from other remote controls.
These include:
MULTI CONTROL
,
RECEIVER
,
REMOTE SETUP
,
RECEIVER CONTROL
and
MASTER VOLUME
.
•
TV CONTROL
buttons (
TV
,
TV VOL +/-
, and
TV INPUT
) can only be learned after selecting
TV
or
TVC
.
