Pioneer Elite VSX-35TX, Руководство по обслуживанию

Страница: 106 / 112

106
VSX-35TX, VSX-33TX
1 STANDBY/ON button
Press to switch the receiver ON or into
STANDBY mode.
STANDBY indicator
Lights when the receiver is in STANDBY mode.
(Please note that this receiver consumes a
small amount of power [1.0 W] in the standby
mode.)
2 MIDNIGHT button
Switches the MIDNIGHT mode on or off
(cannot be used in THX mode).
3 DIGITAL NR button
Switches the DIGITAL Noise Reduction on or
off (cannot be used in THX mode).
4 MULTI CH INPUT
Use to hook up an external component that can
decode other types of signals and input them
into the VSX-35TX.
5 DSP MODE button
Press repeatedly to select a DSP sound mode.
(HALL 1, HALL 2, JAZZ, DANCE, THEATER 1, or
THEATER 2, 5/7 CH STEREO). Use these
modes to produce surround sound from
standard (two channel) stereo sources and
create different listening environments.
STEREO/DIRECT button
Switches the receiver into STEREO mode if it
was in a different sound mode (like ADVANCED
THEATER) or toggles between DIRECT and
STEREO mode. For more on STEREO mode.
DIRECT playback bypasses the tone controls
and channel level for the most accurate repro-
duction of a program source.
/ DTS buttons
THX CINEMA – Cycles through the THX
CINEMA, THX SURROUND EX or THX AUTO
sound modes. Use when listening THX-
certified sources if you have THX-certified
speaker setup or want to re-create a THX-style
sound environment. It is also appropriate for
Dolby Digital, Dolby Pro Logic or DTS
sources.Those with surround back speakers
can use all three THX modes, those without
should use the THX CINEMA mode.
ADVANCED THEATER – Use to select one of
the four Advanced Theater modes. Use to
create certain types of sound environments
when listening to Dolby Digital, Dolby Pro Logic
or DTS sources.
STANDARD – Use for pure decoding of multi
channel sources, especially Dolby Digital, Dolby
Pro Logic or DTS software.
6 SPEAKERS (A/B) button
Use to select the speaker system. A is the
primary setting. It plays all speakers hooked up
to the A system. A & B setting only plays the
front speakers of both the A & B systems and
the sub-woofer. Multi channel sources will be
down-mixed to these speakers so no sound will
be lost. B setting only plays the front speakers
connected to the B system and multi channel
sources will be down-mixed to these two
speakers. The button cycles through the
speaker systems as follows: A
]
B
]
A&B
]
off
7 FL DIMMER button
Use to adjust the brightness of the fluorescent
display (FL = fluorescent display).
Four levels of the brightness ranging from very
dim to very bright can be selected. Each press
changes the brightness of the display.
8 VIDEO SELECT button
Switches the receiver between the various
types of video input while keeping the audio
input the same.
9 TAPE 2 MONITOR button
Selects the tape deck (MD recorder, etc.)
connected to the TAPE 2 MONITOR inputs/
outputs. Allows monitoring of a recording as it's
being made.
10 TUNER CONTROL buttons
BAND – Press to select the AM or FM band.
CLASS – Press repeatedly to switch the preset
station classes.
TUNING SELECT – Switches the STATION/
TUNING button between station memory and
frequency select modes.
STATION –/+ – Selects station memories
when using the tuner.
TUNING –/+ – Selects the frequency when
using the tuner.
MPX – Press to switch between auto stereo
and MONO reception of FM broadcasts. When
the broadcast signal is weak, selecting MONO
will improve the sound quality.
MEMORY – Press to start the memorization of
a preset station.
11 Display
12 Remote sensor
Point the remote control toward the remote
sensor to operate the receiver.
13 MULTI-JOG CONTROL buttons
SETUP – Press to switch the setup mode.
RETURN – Press to move back one step in the
SETUP process.
Front Section (for VSX-35TX and VSX-33TX)