Pioneer Elite SC-LX704 Скачать руководство пользователя страница 212

Страница: 212 / 225

212

≫

≫

≫

≫

≫

≫

About Dolby signals

• When surround back speakers are included in the speaker layout, and software that is recorded with the 5.1-channel Dolby audio format is

played, the surround channel audio may be output from the surround back speakers.

• Some Dolby Atmos audio format that is used on games, etc., may be recognized as "Multichannel PCM". If this occurs, check the firmware

updates for the game console.

About DTS signals

• With media that switches suddenly from DTS to PCM, PCM playback may not start immediately. In such a case, stop playback on the player side

for approx. 3 seconds or more. Then, resume playback. The playback will be performed normally.

• DTS playback may not be performed normally on some CD and LD players even if the player and this unit are digitally connected. If some

processing (e.g., output level adjustment, sampling frequency conversion, or frequency characteristic conversion) has been executed for the DTS

signal being output, this unit cannot recognize it as a genuine DTS signal, and noise may occur.

•

While playing a DTS-compatible disc, if a pause or skip operation is performed on your player, noise may occur for a short period. This is not a

malfunction.

Video

• Confirm that the connection between the output jack on the connected device and the input jack on this unit is correct.

• Make sure that none of the connecting cables are bent, twisted, or damaged.

• When the TV image is blurry or unclear, the power cord or connection cables of the unit may have interfered. In such a case, keep distance

between TV antenna cable and cables of the unit.

• Check the switching of the input screen on the monitor side such as a TV.

Check the following if the problem persists after you have confirmed the above.

No image appears

• Change the input selector on this unit to the position of the terminal to which the player is connected.

No image from a device connected to HDMI IN jack

Содержание Elite SC-LX704


































































































































































































































Результаты поиска

Содержание Elite SC-LX704

Отзывы:

Похожие инструкции для Elite SC-LX704

Бренды по названию

Популярные бренды

Pioneer Elite SC-LX704, Инструкция по эксплуатации

Результаты поиска

Содержание Elite SC-LX704

Отзывы:

Похожие инструкции для Elite SC-LX704

Бренды по названию

Популярные бренды