3
Firmware Update continued
CAUTION:
CONFIRM THE FIRMWARE FILES AND APPROPRIATE PROCEDURE ARE FOR THE MODEL YOU ARE
UPDATING. USING THE INCORRECT FILES MAY RENDER THE UNIT INOPERABLE AND REQUIRE
REPAIR.
DO NOT TURN OFF OR DISCONNECT THE POWER CORD FROM THE AVR DURING THE UPDATE
PROCESS!
DO NOT DISCONNECT THE USB STORAGE DEVICE DURING THE UPDATE PROCESS!
1. Using you PC, unzip the downloaded file and copy the two firmware files (*.fw and *.bin) to the root
directory of the USB Storage Device.
2. Follow steps 1 to 5 in the
Check Firmware Version
procedure.
3. Connect the USB Storage Device to the USB Connector on the front of the receiver and wait for 1 minute.
4. Using the or button, Select “b. Update via USB Memory” and press the
ENTER
button. The message
“A New file has been found.” will be displayed. Confirm the firmware version displayed is the correct one
for the model you are updating.
5. Press the
ENTER
button to start the update process. It can take up to 20 minutes to complete.
6. When finished, the receiver will automatically turn off.
7. Remove the USB Storage Device.
8. The Firmware Update process is complete.
