1
Dolby Atmos-enabled Speakers Setup Instructions for
Elite Models SC-85, SC-87, and SC-89
Use this procedure to setup Dolby Atmos-enabled Speakers and update the A/V receiver’s firmware using a
USB storage device. If you have any difficulty carrying out these instructions, please call Pioneer’s Customer
Support Center toll free in the USA at 1-844-679-5350 for assistance.
The first step is to confirm the AVR’s firmware version is 1-290-008-518-121 or newer.
The buttons and connector mentioned in the following procedures are located on the Remote Control or the
AVR’s Front Panel as shown in Figure 1.
Check the Firmware Version
1. Turn on the receiver by pressing the
STANDBY/ON
button.
2. If using the Remote, press the
MAIN
button.
3. Press the
HOME MENU
button and using the
or button
,
Select “4. System Setup” and
press the
ENTER
button.
4. Using the or button
,
Select “g. Other Setup”
and press the
ENTER
button.
Remote
AVR Front Panel
Figure 1
