60
SC-71
1
2
3
4
A
B
C
D
E
F
1
2
3
4
8.4 HOW TO UPDATE FIRMWARE
[Case of Abnormal Completion]
If REGION File writing did not complete normally, an error number is displayed rather than the model number.
Please perform rewriting based on the coping strategy by error numbers below.
*1 If an error is appeared, disconnect and connect the AC cord within
3
0 seconds and try to write the destination again.
FL Display Examples
Reason for Display
Coping
S
trategy
E
R
R
O
R
R 0
1
.
Case of unsuccessful U
S
B Read-in
.
Try writing with other U
S
B Memory
.
Case of No File for Writing
.
Place writing required REGION File
to root directory *1
E
R
R
O
R R
0
3
Case of destroyed File
Download REGION File again
E
R
R
O
R R
0
4
Case of destination information for
different model is written
Download REGION File for correct
model
MAIN com (EMMA), SUB com (EVENT) , DSP Flash ROM and BridgeCo IC Update
by USB Memory and the Confirmation of the Version
[Preparations]
UPDATE PANEL Mode (Version update)
1. Copy the UPDATE FILE to the root directory of the U
S
B Memory.
Note:
NEVER copy several UPDATE FILE
S
to the root directory of the U
S
B Memory.
Copy only the corresponding UPDATE FILE.
Enter the UPDATE PANEL mode.
Check a current version.
2. Turn off the power to this unit by setting Multi-Zone to "OFF".
3
. Connect the U
S
B Memory to the U
S
B terminal (A type) of the front panel.
1. While holding down
"TUNE
↑
"
key on the front panel, press
"STANDBY ON/OFF"
key and
moves to the
UPDATE PANEL mode
.
2. The updating process is as follows.
[Procedures]
Workflow
Check an updated version.
Turn the power off.
(Release the UPDATE PANEL mode.)
Update it.
Update completed.
(Turn the power OFF automatically.)
Updating process
Enter the UPDATE PANEL mode again.
Checking process
Содержание Elite SC-71
Страница 21: ...21 SC 71 5 6 7 8 5 6 7 8 A B C D E F ...
Страница 63: ...63 SC 71 5 6 7 8 5 6 7 8 A B C D E F ...
