11
<DRB1237>
En
-
DIGITAL JOG BREAK METER (P.16)
Indicates the amount of control applied with the Jog
dial.
=
Jog Effect Select Buttons
(JET/ZIP/WAH/RING/FUZZ) (P.16)
Press to select one of 5 effects (JET, ZIP, WAH, RING
or FUZZ). The selected button flashes.
~
HOLD button (P.16)
Press the button to light it and the effect currently
applied to the sound will continue after the jog dial
stops rotating.
!
DIGITAL JOG BREAK Lever Switch
(ON/OFF/LOCK-ON) (P.16)
The Digital Jog Break sound is output when this
switch is set to ON. The function is OFF when the
switch is set to the center position (through). It is ON
and locked at the rear position and is ON temporarily
at the front position (the switch returns to the center
position when released).
@
DIGITAL JOG BREAK Dial (P.16)
The speed of Jog dial rotation changes the amount
of control applied to each effect.
#
JOG MEMORY PLAY Button (P.17)
Reproduces the effect created with the Jog dial that
was stored in memory.
$
JOG MEMORY Button (M) (P.17)
Holding down this button when the Jog dial is ro-
tated stores up to 8 seconds worth of effects created
with the dial. The PLAY button
#
lights when effects
have been saved to memory.
%
Digital Jog Break Effect Depth Dial
(DEPTH) (P.16)
Adjusts the depth of the Digital Jog Break effect.
^
Beat Effect Depth Dial (DEPTH) (P.15)
Adjusts the depth of the Beat effect.
&
MIX Dial (P.15)
Sets the balance between the original sound and the
created effect.
*
Headphone Monitor Select Switch
(BEAT/MASTER/JOG) (P.13)
This switch is located on the front panel of the unit.
Selects the source to be monitored in the head-
phones.
BEAT:
monitors the beat effect.
MASTER: monitors the master output.
JOG:
monitors the effects created with the Dig-
ital Jog Break (and the beat effect when the
BEAT EFFECTS Lever Switch
£
is ON).
(
Headphone Jack (PHONES)
This jack is located on the front panel.
Connect a headphone (with a 1/4-inch/6.3 mm stereo
plug) to this jack.
)
Headphone Monitor Level Dial (MONITOR)
Adjusts the headphone sound level.
_
Tap button (TAP/SHIFT) (P.14)
BPM can be input manually by tapping the TAP but-
ton two times or more in time with the beat (quarter
note).
When the TIME dial
¡
is turned while this button is
held down, you can directly control BPM manually.
+
BPM Measurement Mode Button (BPM MODE)
(P.14)
Selects the BPM measurement mode (AUTO/MIDI/
TAP)
AUTO: makes automatic measurements from the
input music signal.
MIDI:
measures BPM from the MIDI signal (timing
clock) input to the MIDI IN terminal.
TAP:
performs manual input of BPM when the TAP
button is tapped. Pressing the TAP button in
AUTO or MIDI mode changes the mode to
the TAP mode.
¡
Time Dial (TIME/BPM) (P.14, 15)
Turn this dial to set the beat effect time. When the
beat effect time is changed, the indicator on the Beat
Select button changes to the set position. The de-
sired BPM setting can be made by turning the TIME/
BPM dial
¡
while holding down the TAP/SHIFT but-
ton
_
. When the BPM MODE button
+
is also pressed,
BPM can be set in 0.1 increments.
™
Beat Select Buttons
(1/4, 1/2, 3/4, 1/1, 2/1, 4/1) (P.15)
Selects the beat with which the beat effect will be
synchronized. When a Beat Select button is pressed,
the BPM (beats per minute) effect time is automati-
cally set.
“1/1” is selected for BPM in the TAP mode. At power
on BPM is set to 120 and “1/1” is selected.
£
BEAT EFFECTS Lever Switch
(ON/OFF/ON-LOCK) (P.15)
The beat effect sound is output when this switch is
set to ON. The effect is set to OFF (through) at the
center position and is ON and locked at the rear posi-
tion. The effect is temporarily ON when set to the
front position (the switch returns to the center posi-
tion when released).
¢
EFFECT FREQUENCY Select Buttons
(LOW/MID/HI) (P.15)
Selects the frequency range to which the Beat effect
is to be applied. Press the button to turn it on and off.
The indicators of the selected ranges light when on.
No effect is generated when all buttons are set to off.
∞
Effect Select Buttons
(DELAY/ECHO/PAN/FLANGER/TRANS) (P.15)
Select one of 5 effects (DELAY, ECHO, PAN, FLANGER
or TRANS). The selected button flashes.
§
BPM Measurement Mode Indicators
(AUTO/MIDI/TAP)
Indicates BPM measurement mode.
¶
EFFECT TIME Display
Indicates the effect time (in ms) set with the TIME
dial or Beat select button.
•
IN & OUT LEVEL switch (+4 dB/–10dB) (P.8, 9)
This switch is located on the rear panel.
NAMES OF PARTS AND FUNCTIONS
