Pioneer DXT-X2669UI, Руководство пользователя

Страница: 4 / 40

Black plate (4,1)
3 Press M.C. to select.
4 Complete the procedure outlined below
to set the menu.
To proceed to the next menu option, you need to
confirm your selection.
CLOCK SET
(setting the clock)
1
Turn M.C. to adjust hour.
2
Press M.C. to select minute.
3
Turn M.C. to adjust minute.
4
Press
M.C.
to confirm the selection.
QUIT appears.
5 To finish your settings, turn M.C. to select
YES.
#
If you prefer to change your setting again, turn
M.C. to switch to NO .
6 Press M.C. to select.
Notes
!
You can set up the menu options from the
system menu. For details about the settings,
refer to
System menu on page 10.
!
You can cancel set up menu by pressing
SRC
/
OFF
.
Basic operations
Important
!
Handle the front panel with care when re-
moving or attaching it.
!
Avoid subjecting the front panel to excessive
shock.
!
Keep the front panel out of direct sunlight
and high temperatures.
!
To avoid damaging the device or vehicle inte-
rior, remove any cables and devices attached
to the front panel before detaching it.
Removing the front panel
1
Press the detach button to release the front
panel.
2
Push the front panel upward (
M
) and then pull
it toward (
N
) you.
3
Always store the detached front panel in a pro-
tective case or bag.
Re-attaching the front panel
1
Slide the front panel to the left.
2
Press the right side of the front panel until it is
firmly seated.
Forcing the front panel into place may result in
damage to the front panel or head unit.
Turning the unit on
1
Press SRC / OFF to turn the unit on.
Turning the unit off
1
Press and hold
SRC
/
OFF
until the unit turns
off.
Selecting a source
1
Press SRC / OFF to cycle between:
RADIO
—
CD
—
USB / iPod
—
PANDORA
—
APP
(application)
—
AUX
!
USB MTP displays while the MTP connection
is in use.
!
When there is an iPod connected and a source
other than
iPod is selected, you can switch to
iPod by pressing iPod .
Adjusting the volume
1
Turn M.C. to adjust the volume.
Note
When this unit
’
s blue/white lead is connected to
the vehicle
’
s auto-antenna relay control termi-
nal, the vehicle
’
s antenna extends when this
unit
’
s source is turned on. To retract the anten-
na, turn the source off.
Frequently used menu
operations
Returning to the previous display
Returning to the previous list (the folder one level
higher)
1
Press / DIMMER .
Returning to the ordinary display
Canceling the main menu
1
Press BAND / .
Returning to the ordinary display from the list
1
Press BAND / .
Radio
Basic operations
Selecting a band
1
Press BAND / until the desired band ( FM1 ,
FM2 , FM3 for FM or AM ) is displayed.
Switching preset stations
1
Press
c
or
d
.
!
Select PCH (preset channel) under SEEK to
use this function.
Manual tuning (step by step)
1
Press c or d .
!
Select MAN (manual tuning) under SEEK to
use this function.
Seeking
1
Press and hold
c
or
d
, and then release.
You can cancel seek tuning by briefly pressing
c
or
d
.
While pressing and holding c or d , you can
skip stations. Seek tuning starts as soon as
you release
c
or
d
.
Note
For details about
SEEK
, refer to
SEEK
(left/right
key setting) on page 5.
Storing and recalling stations
for each band
Using preset tuning buttons
1 To store: Press and hold down one of the
preset tuning buttons (1/ to 6/ ) until
the number stops flashing.
2 To recall: Press one of the preset tuning
buttons (1/ to 6/ ).
Using this unit
4
Section
Using this unit
En
02
<QRD3234-A>4