<<diagnostic method>>
4) Perform Extended Self Test.
Press [3] and then press [2], Extended Self Test will begin.
The remain of a test is displayed by %, and if it results to 00%, a test will end it.
Check the existence of an error after a test end.
[Judgment criteria]
- "--Completed" is displayed when the HDD have no error
When no error in the test so far, all operation except the writing of HDD is normal.
When there is fault of an HDD playback system, there is possibility of faults except HDD.
However, it is necessary to test by HDD Read/Write Check when there is fault of a
record system
in HDD operation.
- "--Error" is displayed when the HDD with an error
Refer to Test Result. If the single figure is "1" or "2", perform this test again.
If the result of a re-test is the same, or if it is "3" or “7”, HDD should be replaced.
[example of no Error]
[example of Error]
After a check, press [Clear] to return to a menu screen.
S.M.A.R.T. DST (Drive Self Test)
1. Exe Self Test
2. Exe Ext Self Test
EXT SELF TEST
[PAUSE]:Test Stop
Test Remainder : 70%
Test Result : Under execution
SELF TEST
[clear]:Test End
Test Remainder : 00%
Test Result : 00
...Completed
EXT SELF TEST
[clear]:Test End
Test Remainder : 40%
Test Result :
7 4
...Error
73
