Adjusting the sound level
1
Press SEL repeatedly to select the mode
you want to adjust from volume, bass,
middle, treble, balance and fader.
The indicator lights in the following order.
VOL
—
BAS
—
MID
—
TRB
—
BAL
—
FAD
2
Rotate VOL (Press VOL +/
–
on the re-
mote control) to adjust the sound quality.
Indication
Turn right
Turn left
VOL
Increase the vo-
lume level.
Decrease the vo-
lume level.
BAS
Increase the bass
level.
Decrease the bass
level.
MID
Increase the mid-
dle level.
Decrease the mid-
dle level.
TRB
Increase the treble
level.
Decrease the tre-
ble level.
BAL
Decrease the level
of the left speaker
(s).
Decrease the level
of the right speak-
er(s).
FAD
Decrease the level
of the front speak-
er(s).
Decrease the level
of the rear speak-
er(s).
Note
When
EQ
or
LOUD
is set to Off, you can adjust
the sound level (
BAS
,
MID
,
TRB
) settings.
Changing the general settings
1
Press MENU so that one of menu items
appears.
2
Press MENU repeatedly to scroll be-
tween menus.
AUX ON
—
AUX 0DB
—
DEMO OFF
—
BEEP 2ND
3
Rotate VOL clockwise or counterclock-
wise to select one of the settings.
!
AUX (Auxiliary) ON/OFF
It is possible to use auxiliary equipment
with this unit. Activate the auxiliary setting
when using auxiliary equipment connected
to this unit.
AUX ON
: When using a auxiliary equip-
ment.
AUX OFF
: When not using a auxiliary
equipment.
!
AUX (Auxiliary) 0 dB/+6 dB
You can adjust the volume level of each
source to prevent radical changes in vo-
lume when switching between sources.
You can set to
0DB
or
+6DB
.
If the input level of the connected compo-
nent is not high enough, increase the input
level properly. Without adjusting the line
input level, you may be surprised at a loud
sound when you change the source from
the external component to another source.
!
DEMO ON/OFF
You can change the initial indication on the
display to information name (function
name, EQ name, etc...) while listen to a
source.
DEMO ON
: Displays information name
while listen to source.
DEMO OFF
: Cancels the function.
!
BEEP 2ND/ALL
Sets the beep sound every time a button is
pressed.
BEEP 2ND
: The beep is generated when a
key is long pressed (one sec.).
BEEP ALL
: The beep is generated when any
key is pressed.
#
You can also select one of the settings by
pressing
VOL
+/
–
on the remote control.
Basic operation
En
18
Section
05