Pioneer DVH-3200UB, Руководство по эксплуатации

Страница: 16 / 44

CM skip/CM back
This function skips a reproduced image for a speci-
fied time. If the currently playing disc contains com-
mercials, it is possible to skip them.
!
This function is available for DVD.
1
To skip progressively backward or forward, press
CM BACK or CM SKIP .
Each time you press CM BACK or CM SKIP it
changes steps in the following order:
!
CM back
5 sec.
—
15 sec.
—
30 sec.
—
1.0 min.
—
2.0 min.
—
3.0 min.
—
0 sec.
!
CM skip
30 sec.
—
1.0 min.
—
1.5 min.
—
2.0 min.
—
3.0 min.
—
5.0 min.
—
10.0 min.
—
0 sec.
After displaying the selected option for two sec-
onds, reproduced image skips.
Resume playback (Bookmark)
By using the Bookmark function, you can resume
playback from a selected scene the next time the disc
is loaded.
To perform this function, set the remote control to
DVD mode.
!
This function is available for DVD video.
1
During playback, press BOOKMARK at the point
you want to resume playback next time.
The selected scene will be bookmarked so that
playback resumes from that point next time. You
can bookmark up to five discs. After that, the old-
est bookmark is replaced by the new one.
!
To clear the bookmark on a disc, press and hold
BOOKMARK
during playback.
!
You can also bookmark a disc by pressing and
holding
EJECT at the point you want to bookmark.
Next time you load the disc, playback will resume
from the bookmarked point. Note that you can
only bookmark one disc using this method. To
clear the bookmark on a disc, press
EJECT .
Specifying title
!
This function is available for DVD.
!
To perform this function, set the remote control to
DVD mode.
1
Press 0 to 10 corresponding to a desired title
number when the disc is stopped.
Title number is displayed for eight seconds and play-
back starts from the selected title.
!
To select 3, press 3 .
!
To select 10, press 10 and 0 in that order.
!
To select 23, press 10 , 10 and 3 in that order.
Specifying track
You can use the search function to specify a track to
search for a desired track.
!
This function is available for Video CD.
!
This function cannot be operated during Video
CD playback featuring PBC (playback control).
!
To perform this function, set the remote control to
DVD mode.
For the numbers to press, please refer to Specifying
title on this page.
Searching for the part you
want to play
You can use the search function to find the part you
want to play.
!
Chapter search and track search are not possible
when disc playback has been stopped.
!
This function cannot be operated during Video
CD playback featuring PBC (playback control).
!
To perform this function, set the remote control to
DVH mode.
1
Press
DIRECT
.
2
Press 0 to 9 to input the desired number.
To cancel the inputted numbers, press
CLEAR
.
3
Press DIRECT .
This starts playback from the selected part.
En
16
Section
02
Operating this unit