Switching the information display
The operation is the same as that of the built-
in DVD player.
Refer to
Switching the information display
on
page 24.
Audio Adjustments
Introduction of audio adjustments
1
Press MULTI-CONTROL to display the
main menu.
2
Use MULTI-CONTROL to select AUDIO.
Turn to change the menu option. Press to se-
lect.
3
Turn MULTI-CONTROL to select the
audio function.
FAD/BAL
(balance adjustment)
—
EQUALIZER
(equalizer recall)
—
TONE CTRL
(equalizer ad-
justment)
—
LOUDNESS
(loudness)
—
SLA
(source level adjustment)
Notes
!
You can also use
A.MENU
on the remote con-
trol to select an audio menu.
!
To return to the previous display, press
DISP/BACK/SCRL
.
!
To return to the main menu, press and hold
DISP/BACK/SCRL
.
!
To return to the ordinary display, press
BAND/ESC
.
!
When selecting FM as the source, you cannot
switch to
SLA
.
!
If you do not operate functions within about
30 seconds, the display automatically returns
to the ordinary display.
Using balance adjustment
You can change the fader/balance setting so
that it can provide the ideal listening environ-
ment in all occupied seats.
1
Use MULTI-CONTROL to select FAD/BAL
in the audio function menu.
2
Press MULTI-CONTROL to display the
setting mode.
3
Press MULTI-CONTROL to select the seg-
ment you wish to set.
Press
MULTI-CONTROL
repeatedly to switch
between fader and balance.
4
Turn MULTI-CONTROL to adjust speaker
balance.
Front/rear speaker balance can be adjusted
between
F 15
and
R 15
.
Left/right speaker balance can be adjusted be-
tween
L 15
and
R 15
.
#
FR 0
is the proper setting when only two
speakers are used.
Using the equalizer
There are six stored equalizer settings such as
DYNAMIC
(dynamic),
VOCAL
(vocal),
NATURAL
(natural),
CUSTOM
(custom),
FLAT
(flat) and
POWERFUL
(powerful) that can ea-
sily be recalled at any time.
!
CUSTOM
is an adjusted equalizer curve
that you create.
!
When
FLAT
is selected no supplement or
correction is made to the sound.
Recalling equalizer curves
1
Use MULTI-CONTROL to select
EQUALIZER in the audio function menu.
2
Press MULTI-CONTROL to display the
setting mode.
3
Turn MULTI-CONTROL to select the
equalizer.
DYNAMIC
—
VOCAL
—
NATURAL
—
CUSTOM
—
FLAT
—
POWERFUL
4
Press MULTI-CONTROL to determine
the selection.
#
Even if the menu has been canceled before
determination, operation is settled.
Operating this unit
En
28
Section
02