DVD-V5000 DVD Player
RS-232 Command Protocol
scanning is finished, the player resumes the Random Access mode and
returns the completed status message.
If the SCAN command is sent while the player is in Fast Forward or Reverse
Playback, the player enters Scan mode.
Once the NS command is sent, the player resets to the normal Playback
mode and returns the completed status message.
Execution :
String
Status Return
DVD player
NF<CR> or NR<CR>
R<CR>
Play mode to Scan mode
NS<CR>
R<CR>
Return to Play mode
5.10 Multi-Speed
Forward or Reverse (DVD)
Function
: Playback occurs at the speed specified in the Speed Register
(Option - Auto Stop)
Format :
(Address)MF
(Multi-Speed
Forward)
(Address)MR (Multi-Speed Reverse)
(Address > 0)
Explanation : If the player is in Random Access mode when the command is
executed, the player enters Multi-Speed mode and returns the completed
status message immediately.
While in Multi-Speed mode, pictures are reproduced at the speed specified
by the Speed Register. No audio tracks are played during Multi-Speed
playback.
NOTE: These speeds are approximate values only.
If an address is specified, an Auto Stop occurs on the selected sequence.
The specified address is written as a Mark Frame or Mark Time and is
compared with the current address. If the current address matches the
specified address, the player enters Pause or Still mode and returns the
completed status message. This command functions in a similar manner as
the Stop Marker command.
If another command is issued before the player reaches the specified
Address, the Auto Stop command is canceled and the player enters normal
Multi-Speed mode. However, if the disc program does not allow a pause, the
player ignores the command.
- 19