17
Audio Connections
This player features two digital (optical and coaxial) and
also analog 2 channel audio output connection
possibilities.
Digital Audio Connections:
You can enjoy the digital audio recorded on DVD discs
from both optical digital and coaxial digital output jacks.
When making digital audio connections, do not
make connections from both the coaxial and optical
digital outputs to the same component.
When a DVD recorded in Dolby Digital, DTS, or MPEG is
loaded, noise will be output if you have made
connections via the digital audio jacks to a receiver or
amplifier that cannot decode a Dolby Digital, DTS, or
MPEG digital bitstream. In this case, be sure to set the
[Digital jack] setting in the Setup Navigator audio settings
to best reflect the type of system you are using
(page 21). Additionally, the digital audio settings can be
adjusted manually in the Setup screen
Audio 1
menu
(page 26).
Note
There is no digital output when the player is set to Karaoke
mode.
DIGITAL OUT (Optical)
The digital signal is transmitted as light pulses through a
fiber-optic cable.
• Use to connect to an AV amplifier or receiver with
built-in Dolby Digital, DTS, or MPEG decoder.
• Use a fiber-optic cable (not supplied) to connect the
digital optical output on the player to the digital optical
input on an AV amplifier or receiver.
DIGITAL OUT (Coaxial)
The digital signal is transmitted electronically through a
coaxial cable.
• Use to connect to an AV amplifier or receiver with
built-in Dolby Digital, DTS, or MPEG decoder.
• Use a coaxial cable (not supplied) to connect the
coaxial digital output on the player to the coaxial digital
input on an AV amplifier or receiver.
Analog Audio Connection:
AUDIO OUT
• Make analog audio connections to a stereo amplifier
or receiver.
• Analog audio connections can also be made to a TV or
monitor with stereo input jacks.
• Use the supplied audio cable to connect one of the
AUDIO OUT analog jacks on the player to the audio
input on the stereo amplifier or receiver.
• When making analog audio connections, be sure to
match the color of the plugs with the color of the
jacks (red and white).
MAKING CONNECTIONS
AV amplifier or receiver with
built-in Dolby Digital, DTS, or
MPEG decoder
OPT.
DIGITAL OUT
DIGITAL IN
Stereo amplifier or receiver
AUDIO OUT
R
L
1
2
AUDIO IN
R
L
AV amplifier or receiver with
built-in Dolby Digital, DTS, or
MPEG decoder
OPT.
DIGITAL OUT
DIGITAL IN
