09
55
En
No picture/No color.
• Incorrect video connections: Check that connections are correct
and that plugs are inserted fully. Also check the video cable for
damage.
• TV/monitor or AV amplifier settings are incorrect: Check the
instruction manual of the connected equipment.
• The video output is set to progressive but your TV/monitor is not
compatible with progressive scan: See page 12 for how to set to
Interlace
.
Screen is stretched or aspect
does not change.
• The
TV Screen
setting in the Initial Settings menu is incorrect.
See page 51 for how to set it correctly for your TV/monitor.
Picture disturbance during
playback or the picture is
dark.
• This player is compatible with Macro-Vision System copy guard.
Some discs include a copy prevention signal, and when this type of
disc is played back, stripes etc., may appear on some sections of
the picture depending on the TV. This is not a malfunction.
• Due to the player’s copy protection circuits, connection of this
device through a VCR or an AV selector may prevent recording or
cause picture problems. This is not a malfunction.
• Check whether the TV system is properly set (page 52).
No audio, or audio is
distorted.
• No audio is output during slow motion playback or when
scanning discs other than audio CDs.
• Some DVD discs do not output digital audio: Switch your
amplifier to the player’s analog outputs.
• Check that the disc is free from dust and dirt, and that it is not
damaged (page 50).
• Check that all interconnects are firmly inserted.
• Check that the plugs and terminals are free of dirt, oxide, etc. and
clean if necessary. Also check the cable for damage.
• Make sure the player’s output is not connected to the amplifier’s
phono (turntable) inputs.
• Check your amplifier/receiver’s settings (volume, input function,
speaker settings, etc.).
The analog audio is OK, but
there appears to be no
digital audio signal.
• Make sure that the
Digital Out
setting is set to
On
(page 38).
• Check that the
Dolby Digital Out
,
DTS Out
and
MPEG Out
settings (page 38) are suitable for your amplifier/receiver — check
the instruction manual that came with your amplifier/receiver.
• SACDs and some DVD-Audio discs do not output digital audio.
Listen through the player’s analog audio outputs.
Noticeable difference in DVD
and CD volume.
• This is due to differences in the audio format and is not a
malfunction.
Problem
Remedy
DV610AV_IBD_EN.book 55 ページ ２００８年６月１１日 水曜日 午前９時２２分
