Pioneer DV-370-K Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 94

background image

DV-370-S

2

1

2

3

4

1

2

3

4

C

D

F

A

B

E

SAFETY INFORMATION

This service manual is intended for qualified service technicians ; it is not meant for the casual do-
it-yourselfer. Qualified technicians have the necessary test equipment and tools, and have been
trainedto properly and safely repair complex products such as those covered by this
manual.Improperly performed repairs can adversely affect the safety and reliability of the product
and mayvoid the warranty. If you are not qualified to perform the repair of this product properly and
safely, youshould not risk trying to do so and refer the repair to a qualified service technician.

WARNING !

THE AEL (ACCESSIBLE EMISSION LEVEL) OF THE LASER POWER OUTPUT IS LESS THAN CLASS 1
BUT THE LASER COMPONENT IS CAPABLE OF EMITTING RADIATION EXCEEDING THE LIMIT FOR
CLASS 1.
A SPECIALLY INSTRUCTED PERSON SHOULD DO SERVICING OPERATION OF THE APPARATUS.

LASER DIODE CHARACTERISTICS

FOR DVD : MAXIMUM OUTPUT POWER : 5 mW

WAVELENGTH : 650 nm

FOR CD :

MAXIMUM OUTPUT POWER : 5 mW

WAVELENGTH : 780 nm

Additional Laser Caution

∗

: See page 49.

1. Laser Interlock Mechanism
• Loading switch (S101 on the LOAB Assy) is used for interlock

  mechanism of the laser.
  When this switch turned ON in SW2 (CLOSE) side (OPEN signal is
  0V and CLOSE signal is 3.5V), a laser becomes the status which can
  completely oscillation.
  Furthermore, the laser completely oscillates in the disc judgment and
  disc playback.
  When player is power ON state and laser diode is not completely
  oscillating, 780nm laser diode is always oscillating by half power.
  • Laser diode is driving with Q7 (650nm LD) and Q8 (780nm LD)
  on the DVDM Assy.
  Therefore, when short-circuit between the emitter and collector of these
  transistors or the base voltage is supplied for transistors turn on, the
  laser oscillates. (failure mode)
  • In the test mode

∗

, there is the mode that the laser oscillates except

  for the disc judgment and playback. LD ON mode in the test mode
  oscillates with the laser forcibly.
  The interlock mechanism mentioned above becomes invalid in this
  mode.

2. When the cover is open, close viewing through the objective lens with
the naked eye will cause exposure to the laser beam.

LABEL CHECK

(Printed on the Rear Panel)

«
1
2
3
4
...
»

Содержание DV-370-K































































































Отзывы:

Нет отзывов

Похожие инструкции для DV-370-K

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 16

Бренд: IAdea Страницы: 15

Бренд: IAdea Страницы: 6

Compact Report stereo 124

Бренд: uher Страницы: 28

Бренд: NAIM Страницы: 28

Бренд: Denver Страницы: 86

Бренд: Radio Shack Страницы: 40

Network Music System

Бренд: Logitech Страницы: 45

Бренд: ViewSonic Страницы: 26

Бренд: Technics Страницы: 18

Бренд: Luxman Страницы: 48

Бренд: Sylvania Страницы: 42

Бренд: Rega Страницы: 24

Бренд: Palsonic Страницы: 8

Бренд: invotel Страницы: 2

Бренд: Sonic Frontiers Страницы: 8

Бренд: Teac Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды