Pioneer DV-360-K Скачать руководство пользователя страница 31

Страница: 31 / 95

DV-360-S

3.9 POWER SUPPLY UNIT [VWR1368]

CP1

AEK7008

800mA

CN401

2/3

CN2

CN1

AC IN

NOTE OF SPARE PARTS IN POWER SUPPLY (SYPS) UNIT

• In case of repairing, use the described parts only to prevent an accident.

• Please write the red mark on the board when the primary section of POWER SUPPLY (SYPS) Unit is repaired.

• Please take care to keep the space, not touching other parts when replacing the parts.

POWER SUPPLY UNIT (VWR1368)

CP4

AEK7012

1.6A

CAUTION : FOR CONTINUED PROTECTION AGAINST RISK OF FIRE.

REPLACE ONLY WITH SAME TYPE NO. 491.800 MFD, BY

LITTELFUSE INC. FOR CP1 (AEK7008).

CAUTION : FOR CONTINUED PROTECTION AGAINST RISK OF FIRE.

REPLACE ONLY WITH SAME TYPE NO. 49101.6 MFD, BY

LITTELFUSE INC. FOR CP4 (AEK7012).

•

NOTE FOR FUSE REPLACEMENT

FOR CONTINUED PROTECTION AGAINST RISK OF FIRE.

REPLACE WITH SAME TYPE AND RATINGS ONLY.

CAUTION -

Содержание DV-360-K
































































































Результаты поиска

Содержание DV-360-K

Отзывы:

Pioneer DV-360-K, Руководство по обслуживанию, Страница: 31 / 95

Результаты поиска

Содержание DV-360-K

Отзывы: