Pioneer DV-300-K Скачать руководство пользователя страница 10

Страница: 10 / 82

Before you start

Putting the batteries in the remote

•

Open the battery compartment cover

and insert the batteries as shown.

Use two AA/R6P batteries and follow the
indications (

) inside the compartment.

Close the cover when you’re finished.

Important

Incorrect use of batteries can result in hazards
such as leakage and bursting. Please observe
the following:

• Don’t mix new and old batteries together.

• Don’t use different kinds of battery

together—although they may look similar,
different batteries may have different
voltages.

• Make sure that the plus and minus ends of

each battery match the indications in the
battery compartment.

• Remove batteries from equipment that

isn’t going to be used for a month or more.

• When disposing of used batteries, please

comply with governmental regulations or
environmental public instruction’s rules
that apply in your country/area.

• Do not use or store batteries in direct

sunlight or other excessively hot place,
such as inside a car or near a heater. This
can cause batteries to leak, overheat,
explode or catch fire. It can also reduce the
life or performance of batteries.

Hints on installation

We want you to enjoy using this product for
years to come, so please use the following
guidelines when choosing a suitable location:

Do...

• Use in a well-ventilated room.

• Place on a solid, flat, level surface, such as

a table, shelf or stereo rack.

Don’t...

• Use in a place exposed to high

temperatures or humidity, including near
radiators and other heat-generating
appliances.

• Place on a window sill or a place where the

player will be exposed to direct sunlight.

• Use in an excessively dusty or damp

environment.

• Place directly on top of an amplifier, or

other component in your stereo system
that becomes hot in use.

• Use near a television or monitor as you

may experience interference—especially if
the television uses an indoor antenna.

• Use in a kitchen or other room where the

player may be exposed to smoke or steam.

• Use on a thick rug or carpet, or cover with

cloth—this may prevent proper cooling of
the unit.

• Place on an unstable surface, or one that

is not large enough to support all four of
the unit’s feet.

DV300_WY_EN.book 6 ページ２００７年１月２５日　木曜日　午後７時２３分

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Compressed audio compatibility

• Compatible formats: MPEG-1 Audio Layer

3 (MP3), Windows Media Audio (WMA)

• Sampling rates: 32 kHz, 44.1 kHz or 48 kHz

• Bit-rates: Any (128 kbps or higher

recommended)

• VBR (variable bit rate) MP3 playback: No

• VBR WMA playback: No

• WMA lossless encoding compatible: No

• DRM (Digital Rights Management)

compatible: No (DRM-protected audio
files will

not

play in this player—see also

DRM

in the

Glossary

on page 39)

• File extensions: .mp3, .wma (these must

be used for the player to recognize MP3
and WMA files – do not use for other file
types)

WMA (Windows Media™ Audio)
compatibility

This player can playback Windows Media
Audio content.

WMA is an acronym for Windows Media Audio
and refers to an audio compression
technology developed by Microsoft
Corporation. WMA content can be encoded by
using Windows Media Player for Windows XP,
Windows Media Player 9 or Windows Media
Player 10 series.

Windows Media is trademark of Microsoft
Corporation.

This product includes technology owned by
Microsoft Corporation and cannot be used or
distributed without a license from Microsoft
Licensing, Inc.

About DivX

DivX is a compressed digital video format

created by the DivX

video codec from DivX,

Inc. This player can play DivX video files
burned on CD-R/-RW/-ROM discs. Keeping
the same terminology as DVD-Video,
individual DivX video files are called “Titles”.
When naming files/titles on a CD-R/-RW disc
prior to burning, keep in mind that by default
they will be played in alphabetical order.

Displaying DivX subtitle files

The font sets listed below are available for DivX
external subtitle files. You can see the proper
font set on-screen by setting the

Subtitle

Language

(in

Language settings

on page 32)

to match the subtitle file.

This player supports the following language
groups:

• Some external subtitle files may be

displayed incorrectly or not at all.

• For external subtitle files the following

subtitle format filename extensions are
supported (please note that these files are
not shown within the disc navigation
menu): .srt, .sub, .ssa, .smi

• The filename of the movie file has to be

repeated at the beginning of the filename
for the external subtitle file.

• The number of external subtitle files which

can be switched for the same movie file is
limited to a maximum of 10.

Group 1

Albanian (sq), Basque (eu), Catalan (ca),
Danish (da), Dutch (nl), English (en),
Faroese (fo), Finnish (fi), French (fr),
German (de), Icelandic (is), Irish (ga), Italian
(it), Norwegian (no), Portuguese (pt),
Rhaeto-Romanic (rm), Scottish (gd),
Spanish (es), Swedish (sv)

Group 2

Albanian (sq), Croatian (hr), Czech (cs),
Hungarian (hu), Polish (pl), Romanian (ro),
Slovak (sk), Slovenian (sl)

Group 3

Bulgarian (bg), Byelorussian (be),
Macedonian (mk), Russian (ru), Serbian
(sr), Ukrainian (uk)

Group 4

Hebrew (iw), Yiddish (ji)

Group 5

Turkish (tr)

DV300_WY_EN.book 8 ページ２００７年１月２５日　木曜日　午後７時２３分

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Connections

Chapter 2

Connections

Easy connections

Important

• Before making or changing any connections, switch off the power and disconnect the power

cable from the AC outlet.

• The setup described here is a basic setup that allows you to play discs using just the cables

supplied with the player. In this setup, stereo audio is played through the speakers in your TV.

• This player is equipped with copy protection technology. Do not connect this player to your

TV via a VCR using audio/video or S-video cables, as the picture from this player will not
appear properly on your TV. (This player may also not be compatible with some combination
TV/VCRs for the same reason; refer to the manufacturer for more information.)

• When connecting to your TV as shown above, do not set the

Component Out

setting (See

Video Output settings

on page 32) to

Progressive

Connect the VIDEO OUT and AUDIO

OUT L/R jacks to a set of audio/video
inputs on your TV.

Use the supplied audio/video cable,
connecting the red and white plugs to the
audio outputs and the yellow plug to the video
output. Make sure you match up the left and
right audio outputs with their corresponding
inputs for correct stereo sound.

See below if you want to use a component or
SCART cable for the video connection.

Connect the supplied AC power cable

to the AC IN inlet, then plug into a power
outlet.

Note

• Before unplugging the player from the

power outlet, make sure you first switch it
into standby using either the front panel

STANDBY/ON

button, or the remote

control, and wait of the

-OFF-

message to

disappear from the player’s display.