4
En <DRC1290>
Thank you for purchasing this Pioneer product. Before using the product, please read
these Operating Instructions fully in order to get the best possible performance from
your purchase.
This unit has been designed exclusively as an optional unit to be used with Pioneer disc
changers DRM-7000 and DRM-3000; as a result, it cannot be used alone or in
combination with other products.
Features
Precautions in Use
¶
Be sure to read these Operating Instructions before use.
¶
After reading these Operating Instructions store them safely to allow later consultation
if necessary.
¶
Do not use this unit in locations exposed to high concentrations of dust, high
temperature, or high humidity.
¶
Do not subject the unit to vibrations or impacts.
¶
Do not allow the unit to be exposed to foreign objects or liquids.
¶
In the event that condensation occurs on the unit, turn off the power and do not
attempt to install it until it has dried thoroughly, since damage may result.
¶
Do not attempt to perform internal inspections or modifications.
¶
If any unnatural smell or noise should be noticed during use, immediately turn off
power and have the unit inspected.
Note:
Installation of this product requires a high level of technical expertise, and should
be undertaken only by professional Pioneer service personnel. For details, consult
your dealer.
Pioneer disclaims all responsibility for any loss of data, or other incidental
damages arising from the use or malfunction of this product. All important
data should be backed up to prevent loss.
Use of this product allows SE-supported 700/300 disc changers to be modified so as to
support LVD host-bus adapters.
(SE: Single-Ended SCSI LVD: Low-Voltage Differential SCSI)
¶
A maximum of 15 devices (including changers) can be connected (composed of
both SE and LVD devices).
¶
Maximum connection cable length: 12 m (LVD side, including internal connections)
¶
Supports Ultra 160 SCSI standards* (LVD side)
* Transfer speed may differ depending on the devices connected.
