Pioneer DJM-700-K, Руководство по обслуживанию, Страница: 33 / 140

DJM-700-S
33
5 6 7 8
5 6
7
8
C
D
F
A
B
E
5.3 HOW TO UPDATE
Select the appropriate parameter file for the chip on the "Device Setup" screen from the "Parameter File" list on the
"Standard" tab.
Click "OK" to finish the setup.
Parameter file for each microcomputer
Click
Microcomputer Parameter file Chip model number
Main 7 8 F1166.prm µPD7 8 F1166
Sub 7 8 F1164.prm µPD7 8 F1164
1. Updating of the DSP program (only when necessary)
2. Updating of the DSP data (only when necessary)
3. Updating of the microcomputer
N ote: After updating of the DSP program or/and data is completed, updating of the main microcomputer must be performed.
Note: Please turn power of DJM-700 into OFF.
1) Start up QB-Programmer then perform the settings for the parameter file.
(The settings for the parameter file must be made only the first time. After the first startup, your settings will be stored
in memory. Later change in the settings is possible.)
How to set the parameter file:
Click on "Device" then "Setup" to display the "Device Setup" screen.
Procedures for Updating
How to Update the Microcomputer