- 8 -
En
g
lis
h
CAUTION
•
Pressing the RESET button resets settings and recorded contents to the factory settings.
– Do not perform this operation when a device is connected to this product.
– Some of the settings and recorded contents will not be reset.
•
The microprocessor must be reset under the following conditions:
– Prior to using this product for the first time after installation.
– If this product fails to operate properly.
– If there appears to be problems with the operation of the system.
1
Turn the ignition switch OFF.
2
Press RESET with a pen tip or other pointed tools.
Settings and recorded contents are reset to the factory settings.
1
Start the engine to boot up the system.
The [Select Program Language] screen appears.
NOTE
From the second time on, the screen shown will differ depending on the previous conditions.
2
Touch the language.
MUTE
Press to display the top menu screen.
Press and hold to power off. To power back on, press any button.
NOTE
The
icon appears when the power is on.
DISP
Press to turn the display on or off.
or
Performs manual seek tuning, fast forwards, reverse and track search controls.
Press to answer or end a call.
RESET
Press to reset the microprocessor (page 8).
Refer to Inserting and ejecting a disc (page 21).
Disc-loading slot
LCD screen
Basic operation
Resetting the microprocessor
Starting up the unit
