Pioneer DEH-X9500BHS Скачать руководство пользователя страница 19

Страница: 19 / 104

S/W control

(rear output and subwoofer setting)

This unit

’

s rear output (rear speaker leads output

and RCA rear output) can be used for full-range
speaker (

Rear SP :F.Range

) or subwoofer (

Rear

SP :S/W

) connection. If you switch the rear output

setting to

Rear SP :S/W

, you can connect a rear

speaker lead directly to a subwoofer without using
an auxiliary amp.

Press

M.C.

to switch the rear output setting.

When no subwoofer is connected to the
rear output, select

Rear SP :F.Range

(full-

range speaker).

When a subwoofer is connected to the rear
output, select

Rear SP :S/W

(subwoofer).

Even if you change this setting, there will be
no output unless you turn the subwoofer out-
put on (refer to

If you change this setting, subwoofer output in
the audio menu will return to the factory set-
tings.

Both rear speaker lead outputs and RCA rear
output are switched simultaneously in this set-
ting.

Software Update

(updating the software)

This function is used to update this unit with the
latest Bluetooth software. For about Bluetooth
software and updating, refer to our website.

Never turn the unit off while the Bluetooth soft-
ware is being updated.

Press

M.C.

to display the data transfer mode.

Follow the on-screen instructions to finish up-
dating the Bluetooth software.

System menu

Press and hold SRC/OFF until the unit

turns off.

Press and hold M.C. until the main menu

appears in the display.

Turn M.C. to change the menu option

and press to select SYSTEM.

Turn M.C. to select the system menu

function.

For details, refer to

System menu

on the pre-

vious page.

Using an AUX source

Insert the stereo mini plug into the AUX

input jack.

Press SRC/OFF to select AUX as the

source.

Note

AUX cannot be selected unless the auxiliary set-
ting is turned on. For more details, refer to

AUX

(auxiliary input)

on the previous page.

Turning the display off or on

Press and hold MIX/DISP OFF until the

display turns on or off.

If an unwanted display appears

Turn off the unwanted display using the proce-
dures listed below.

Press M.C. to display the main menu.

Turn M.C. to change the menu option

and press to select SYSTEM.

Turn M.C. to display DEMO OFF and press

to select.

Turn M.C. to switch to YES.

Press M.C. to select.

SiriusXM Satellite Radio

You can use this unit to control SiriusXM Con-
nect Vehicle Tuner, which is sold separately.
For more information on how to install SiriusXM
Connect Vehicle Tuner, consult the installation
guide included with the tuner.
Everything worth listening to is on SiriusXM, get-
ting over 130 channels, including the most com-
mercial

‐

free music, plus the best sports, news,

talk and entertainment. A SiriusXM Vehicle
Tuner and Subscription are required. For more
information, visit www.siriusxm.com.

To subscribe to the SiriusXM
Satellite Radio service

Switch the source to SiriusXM.

You should be able to tune in to Channel 1. If
you cannot get Channel 1, make sure that your
SiriusXM Connect Vehicle Tuner is installed cor-
rectly as described in the tuner installation
guide.

Switch to Channel 0 and check the Radio

ID.

You will need this number to activate your sub-
scription. For details, refer to

Displaying the

Radio ID

on the next page.

Activate the service either online or by

phone.

Go to www.siriusxm.com, and click on ACTI-
VATE RADIO to start the activation process.

Call SiriusXM Listener Care at 1-800-XM-
RADIO (1-866-635-2349) to activate.

As part of the activation process, the SiriusXM

satellites will send an activation message to your
SiriusXM Connect Vehicle Tuner. Once the tuner has
received the message, this unit will display

“

Subscription Updated -

”

. Once the update is com-

pleted, you can start tuning in to the channels in
your subscription.

The activation process usually takes 10 to 15 minutes
but may take up to an hour in some cases. Do not
turn off the unit while the activation message is dis-
played.

Basic operations