background image

9

En

En
g

lis

h

*1 Not available when [SUB.W/SUB.W] is selected in [SP-P/O MODE] in the INITIAL settings (page 5).
*2 Not available when [REAR/REAR] is selected in [SP-P/O MODE] in the INITIAL settings (page 5).
*3 Not available when [OFF] is selected in [SUB.W].

You can also access to these menus when the unit is turned off.

* Depending on your car, this function may not work properly. In this case, contact your dealer or an 

authorized PIONEER Service Station.

SUB.W

*2

[NOR], [REV], [OFF]

Select the subwoofer phase.

SUB.W CTRL

*2*3

Cut-off frequency:

 [50HZ], 

[63HZ], [80HZ], [100HZ], [125HZ], 
[160HZ], [200HZ]

Output level:

 [–24] to [+6]

Slope level:

 [–12], [–24]

Only frequencies lower than those in the 
selected range are output from the subwoofer.

BASS BOOST

[0] to [+6]

Select the bass boost level.

HPF SETTING

Cut-off frequency:

 [OFF], [50HZ], 

[63HZ], [80HZ], [100HZ], [125HZ], 
[160HZ], [200HZ]

Slope level:

 [–12], [–24] 

Only frequencies higher than the high-pass filter 
(HPF) cutoff are output from the speakers.

SLA

[+4] to [–4]

Adjust the volume level for each source except 
FM.

SYSTEM settings

Menu Item

Description

CLOCK SET

Set the clock (page 5).

12H/24H

[12H], [24H]

Select the time notation.

AUTO PI

[ON], [OFF]

Search for a different station with the same 
programming, even if using a preset station.

Menu Item

Description

AUX

[ON], [OFF]

Set to [ON] when using an auxiliary device 
connected to the unit.

S.REMOTE

*

[OFF], [PIONEER], [PRESET]

Select [PIONEER] or [PRESET] according to your 
wired remote control.

ILLUMINATION settings

Menu Item

Description

DIM SETTING

[SYNC CLOCK], [MANUAL]

Change the display brightness.

BRIGHTNESS

[1] to [10]

Change the display brightness.
The available setting ranges differ depending on 
[DIM SETTING].

MIXTRAX settings

Menu Item

Description

SHORT PLAYBCK/SHORT MODE

[1.0 MIN], [1.5 MIN], [2.0 MIN], 
[2.5 MIN], [3.0 MIN], [OFF]

Select the length of the playback time.

MIX PATTERN

[SOUND LEVEL]

Change the MIXTRAX special effects according 
to the audio level.
The mix pattern changes according to the 
sound level.

[LOW PASS]

The mix pattern changes according to the bass 
level.

[RANDOM]

The mix pattern changes randomly according 
to the sound level mode and low pass mode.

Menu Item

Description

Содержание DEH-X1790UB

















Отзывы: