15
C:\Program Files (x86)\Adobe\AdobeFrameMaker12\Structure\xml\Pioneer\1.0\020Chapter.fm
DEH-X500BT/DEH-S4150BT
19_806_807ME_QRI3104(A5_Horizon)
En
English
PLAY
Start playback.
STOP
Stop playback.
AUDIO settings
Menu Item
Description
EQ SETTING
[SUPER BASS], [POWERFUL],
[NATURAL], [VOCAL], [CUSTOM1],
[CUSTOM2], [FLAT]
Select an equalizer band and
level for further customizing.
Equalizer band:
[50HZ] to
[12.5kHZ]
Equalizer level:
[–6] to [+6]
Select or customize the equalizer curve.
•
When you select a setting other than
[CUSTOM1] and [CUSTOM2], you can also
customize the equalizer curve by pressing and
holding the
M.C.
dial, then store the
customized equalizer curve in [CUSTOM1].
FADER
*1
Adjust the front and rear speaker balance.
BALANCE
Adjust the left and right speaker balance.
SUBWOOFER
[ON], [OFF]
Set to [ON] when using a subwoofer speaker.
SUBWOOFER
*2
[NOR], [REV]
Select the subwoofer phase.
SPEAKER LEVEL
Types of speaker:
[FRONT L],
[FRONT R], [REAR L], [REAR R],
[SUBWOOFER]
Output level:
[–24] to [10]
Select a speaker unit (filter) and adjust the
output level.
•
Each value you have adjusted changes when
you change the [POSITION] setting (page
Menu Item
Description
CROSSOVER
Select a speaker unit (filter) to adjust the HPF or
LPF cut-off frequency and the slope for each
speaker unit.
For details on the [CROSSOVER] setting, see
page
POSITION
[OFF], [FRONT LEFT] (front seat
left), [FRONT RIGHT] (front seat
right), [FRONT] (front seats), [ALL]
Select a listening position to adjust the speakers'
output levels automatically and add a delay time
that corresponds to the number and locations of
occupied seats.
TIME ALGNMNT
[INITIAL], [OFF], [CUSTOM]
Select a type of speaker and
adjust the speaker distance for
further customizing in [CUSTOM].
Types of speaker:
[FRONT L],
[FRONT R], [REAR L], [REAR R],
[SUBWOOFER]
Speaker distance (cm):
[350] to
[0.0]
Select or customize the time alignment settings
to reflect the distance between the listener’s
position and each speaker.
•
Select [INITIAL] to initialize the setting value.
•
Select [OFF] to reset all setting values to 0.
•
The [CUSTOM] setting is available when
[FRONT LEFT] or [FRONT RIGHT] is selected in
[POSITION] (page
•
The [CUSTOM] setting is not available when
[OFF] is selected in [SUBWOOFER] (page
SAVE SETTINGS
[YES], [NO]
Save to later recall the following sound settings
at their current values: [CROSSOVER], [SPEAKER
LEVEL], [EQ SETTING], [POSITION], [TIME
ALGNMNT], [D.BASS], [SUBWOOFER].
LOAD SETTINGS
Load the sound settings, when you have already
performed [SAVE SETTINGS].
D.BASS (Dynamic Bass Enhancer/Club Sound Bass)
[OFF], [LOW], [HI]
Boost the bass level dynamically to offer an
effect as if a subwoofer was added to the system.
LOUDNESS
[OFF], [LOW], [MID], [HI]
Compensate for clear sound at low volume.
Menu Item
Description
PioneerTest.book Page 15 Friday, March 16, 2018 3:00 PM
