Extracción
Colocación
5
C:\Program Files (x86)\Adobe\AdobeFrameMaker12\Structure\xml\Pioneer\1.0\020Chapter.fm
DEH-X500BT/DEH-S4150BT
19_806_807ME_QRI3104(A5_Horizon)
Es
Español
Importante
•
Evite que el panel frontal sufra golpes excesivos.
•
Mantenga el panel frontal alejado de la luz solar directa y las altas temperaturas.
•
Almacene siempre el panel frontal desconectado en un estuche o bolso de protección.
Restablecer el microprocesador
Se debe reiniciar el microprocesador en las siguientes situaciones:
– Antes de usar esta unidad por primera vez, tras al instalación
– Si la unidad no funciona correctamente
– Cuando aparecen mensajes incorrectos o extraños en la pantalla
1
Extraiga el panel frontal (página
4).
2
Presione el botón
RESET
con un instrumento puntiagudo de longitud superior a
8
mm.
Botón
RESET
Preparación del control remoto
Quite la lámina de aislamiento antes de usarlo.
Cómo sustituir la batería
Inserte la batería CR2025 (3
V) con los polos de más
(+) y menos (-) en la orientación correcta.
ADVERTENCIA
•
No ingiera la batería; hay peligro de una quemadura química.
(El control remoto proporcionado) Este producto contiene una pila de botón. Si la pila de botón es
tragada, puede causar severas quemaduras internas en solo dos horas y puede llevar a la muerte.
Mantenga las baterías nuevas y usadas lejos del alcance de los niños.
Si el compartimento de la batería no se cierra con seguridad, deje de utilizar el producto y
manténgalo alejado de los niños.
Si cree que la batería fue tragada o colocada dentro de cualquier parte del cuerpo, busque atención
médica inmediatamente.
•
No exponga la pila ni el control remoto a calores excesivos, como la luz solar directa o fuego.
PRECAUCIÓN
•
Existe el posible riesgo de explosión si la pila se sustituye de manera incorrecta. Cuando sustituya la
pila, sustitúyala por otra del mismo tipo.
•
No manipule ni almacene la pila con herramientas ni objetos metálicos.
•
Si la pila tiene una fuga, quite la pila y limpie el control remoto por completo. Luego, instale una pila
nueva.
•
Para desechar las pilas usadas, cumpla con los reglamentos gubernamentales o las normas
ambientales pertinentes de las instituciones públicas aplicables en su país/zona.
Importante
•
No almacene el control remoto a altas temperaturas ni bajo la luz solar directa.
•
No deje caer el control remoto al piso, donde pueda quedar atascado bajo el pedal del freno o el
acelerador.
Menú de configuración
Después de la instalación, gire la llave de encendido hasta la posición ON y aparecerá el
menú de configuración en la pantalla.
1
Gire el dial
M.C.
para seleccionar las opciones y presione para confirmar.
Para avanzar a la siguiente opción de menú, debe confirmar la selección.
PioneerTest.book Page 5 Friday, March 16, 2018 3:13 PM