Pioneer DEH-P9850BT, Руководство по эксплуатации

Страница: 84 / 104

Black plate (84,1)
3 Push MULTI-CONTROL up or down to
set the date.
Pushing
MULTI-CONTROL
up will increase
the selected day, month or year. Pushing
MULTI-CONTROL
down will decrease the se-
lected day, month or year.
Setting the clock
Use these instructions to set the clock.
1 Use MULTI-CONTROL to select Clock.
Clock
appears in the display.
2 Push MULTI-CONTROL left or right to
select the segment of the clock display you
wish to set.
Pushing
MULTI-CONTROL
left or right will se-
lect one segment of the clock display:
Hour
—
Minute
As you select segments of the clock display
the segment selected will blink.
3 Push MULTI-CONTROL up or down to
set the clock.
Pushing MULTI-CONTROL up will increase
the selected hour or minute. Pushing
MULTI-CONTROL down will decrease the se-
lected hour or minute.
Notes
!
You can match the clock to a time signal by
pressing
MULTI-CONTROL .
—
If the minute is 00 to 29 , the minutes are
rounded down. (e.g., 10:18 becomes
10:00 .)
—
If the minute is
30
to
59
, the minutes are
rounded up. (e.g., 10:36 becomes 11:00 .)
!
Even when the sources are off, the clock dis-
play appears on the display. Pressing
CLOCK
when the sources and feature demo are off,
turns the clock display on or off.
Setting the FM tuning step
The FM tuning step employed by seek tuning
can be switched between 100 kHz, the preset
step, and 50 kHz.
1 Use MULTI-CONTROL to select
FM tuning step.
FM tuning step
appears in the display.
2 Press MULTI-CONTROL to select the FM
tuning step.
Pressing MULTI-CONTROL repeatedly will
switch the FM tuning step between 50 kHz
and 100 kHz. The selected FM tuning step will
appear in the display.
Note
If seek tuning is performed in 50 kHz steps, sta-
tions may be tuned in imprecisely. Tune in the sta-
tions with manual tuning or use seek tuning
again.
Setting the AM tuning step
The AM tuning step can be switched between
9 kHz, the preset step, and 10 kHz. When
using the tuner in North, Central or South
America, reset the tuning step from 9 kHz (531
kHz to 1 602 kHz allowable) to 10 kHz (530 kHz
to 1 640 kHz allowable).
1 Use MULTI-CONTROL to select
AM tuning step.
AM tuning step
appears in the display.
<CRB2179-A/N>84
Initial Settings
En
84
Section
14