Pioneer DEH-P9400BH, Руководство пользователя

Страница: 4 / 96

Head unit
1
9
3 4 5
6 8 b a
2
7
c
d
Part Part
1
(phone/on
hook)
8
/
DISP OFF
2
LEVER
9
BAND / (iPod)
3
/ DISP
a
SRC / OFF
4
(list)
b
MULTI-CONTROL
( M.C. )
5
Open button
c
Disc loading slot
6
AUX input jack
(3.5 mm stereo
jack)
d
h (eject)
7 /
CAUTION
Use a Pioneer USB cable when connecting the
USB audio player/USB memory device as devi-
ces connected to the unit directly will protrude
out, which is dangerous.
Do not use unauthorized products.
Remote control
Remote controller buttons marked with the
same numbers as on the unit operate in the
same way as the corresponding unit button re-
gardless of button name.
e
k
i
a
9
f
3
h j
g
Part Operation
e VOLUME
Press to increase or decrease
volume.
f MUTE
Press to mute. Press again to
unmute.
g
a
/
b
/
c
/
d
Press to perform manual seek
tuning, fast forward, reverse
and track search controls.
Also used for controlling func-
tions.
h
While operating the phone,
press to end a call or reject an
incoming call.
i
e
Press to pause or resume play-
back.
Part Operation
j
Press to start talking on the
phone while operating a
phone.
k
LIST /
ENTER
Press to display the disc title,
track title, folder, or file list de-
pending on the source.
While in the operating menu,
press to control functions.
Set up menu
When you turn the ignition switch to ON after in-
stallation, set up menu appears on the display.
You can set up the menu options below.
1 After installation of this unit, turn the
ignition switch to ON.
SET UP
appears.
2 Turn M.C. to switch to YES.
#
If you do not operate for 30 seconds, the set up
menu will not be displayed.
#
If you prefer not to set up at this time, turn M.C.
to switch to NO .
If you select NO , you cannot set up in the set up
menu.
3 Press M.C. to select.
4 Perform the following procedures to set
the menu.
To proceed to the next menu option, you need to
confirm your selection.
Language select
(multi-language)
1
Turn M.C. to select the desired language.
English
—
Français
—
Español
2
Press M.C. to confirm the selection.
Calendar (setting the date)
1
Turn
M.C.
to change the year.
2
Press M.C. to select day.
3
Turn M.C. to change the day.
4
Press M.C. to select month.
5
Turn M.C. to change the month.
6
Press
M.C.
to confirm the selection.
Clock (setting the clock)
1
Turn M.C. to adjust hour.
2
Press M.C. to select minute.
3
Turn M.C. to adjust minute.
4
Press M.C. to confirm the selection.
Contrast (display contrast setting)
1
Turn M.C. to adjust the contrast level.
0
to
15
is displayed as the level is increased or
decreased.
2
Press M.C. to confirm the selection.
Demonstration (demo display setting)
1
Turn M.C. to set the demo display to off.
2
Press M.C. to confirm the selection.
Quit
appears.
5 To finish your settings, turn M.C. to select
YES.
#
If you prefer to change your setting again, turn
M.C. to switch to NO .
6 Press M.C. to select.
Notes
!
Because demonstration mode is the function
for displaying at stores, do not use this func-
tion while driving.
!
You can set up the menu options in the initial
settings. For details about the settings, refer
to
Initial settings on page 14.
!
You can cancel set up menu by pressing
SRC / OFF .
Operating this unit
4
Section
Operating this unit
En
02