Pioneer DEH-P7050BT XN, Руководство по эксплуатации

Страница: 26 / 66

#
If the difference between the ring volume and
caller
’
s voice volume is big, overall volume level
may become unstable.
#
Before disconnecting the cellular phone from
this unit, make sure to adjust the volume to a
proper level. If the volume is muted (zero level) on
your cellular phone, the volume level of your cel-
lular phone remains muted even after the cellular
phone is disconnected.
Notes
!
The equalizer curve for the phone source is
fixed.
!
When selecting the phone source, you can
only operate
FADER (balance adjustment) in
the audio menu.
!
When selecting the phone source, the fader
value is set to
FADER :F15
as an initial setting.
Introduction of connection and
registration
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select
CONNECTION.
The connection menu is displayed.
Turn to change the menu option. Press to se-
lect.
#
You can also select this menu by pressing and
holding PHONE / / CONNECT on the ordinary
display.
3 Turn MULTI-CONTROL to select the
function.
PAIRED PHONE
(paired phone)
—
BT HANDS FREE (new phone)
—
SET PHONE
(phone registration)
—
DISCONNECT PHONE
(disconnect phone)
—
DELETE PHONE
(delete
phone)
If the phone is not connected and not
paired
The following function can be operated.
!
BT HANDS FREE (new phone)
If the phone is not connected but paired
The following functions can be operated.
!
PAIRED PHONE (pair phone manually)
!
BT HANDS FREE
(new phone)
!
DELETE PHONE (delete phone)
If the phone is connected but not paired
The following functions can be operated.
!
SET PHONE (phone registration)
!
DISCONNECT PHONE
(disconnect phone)
!
DELETE PHONE (delete phone)
If the phone is connected and paired
The following functions can be operated.
!
DISCONNECT PHONE (disconnect phone)
!
DELETE PHONE
(delete phone)
Notes
!
The device name is set to PIONEER FLAP BT
as default. You can change the device name
in the initial setting. Refer to
Editing device
name on page 46.
!
PIN code is set to
0000
as the default. You
can change this code in the initial setting.
Refer to
Entering PIN code for Bluetooth wire-
less connection on page 45.
Connecting and disconnecting
a cellular phone
Using a cellular phone to initiate a
connection
1 Display the connection menu.
Refer to Introduction of connection and regis-
tration on this page.
2 Use MULTI-CONTROL to select
BT HANDS FREE.
3 Use MULTI-CONTROL to select a group.
Push MULTI-CONTROL up or down to select a
group.
NOKIA (Nokia)
—
STANDARD (standard)
#
Normally select STANDARD . If the device of
Nokia is not paired to this unit, select
NOKIA
.
#
Push MULTI-CONTROL left or right to display
a group name or an ID.
4 Press MULTI-CONTROL to switch to
PAIRE FROM PHONE.
Push
MULTI-CONTROL
up or down to switch
PAIRE FROM PHONE and SEARCH DEVICE .
Operating this unit
En
26
Section
02