Fig. 12
Abb. 12
Afb. 12
1*
2*
4*
3*
5*
10.
3. Subwoofer output or
non fading output
34.
4. Antenna jack
1. This product
2. Front output
5. Fuse
7. IP-BUS input
(Blue)
8. IP-BUS cable
Note:
Depending on the kind of vehicle, the function
of 3* and 5* may be different. In this case, be
sure to connect 2* to 5* and 4* to 3*.
11. Connect leads of the same
color to each other.
12. Cap (1*)
When not using this terminal,
do not remove the cap.
13. Yellow (3*)
Back-up
(or accessory)
14. Yellow (2*)
To terminal always supplied
with power regardless of
ignition switch position.
15. Red (5*)
Accessory
(or back-up)
16. Red (4*)
To electric terminal controlled
by ignition switch (12 V DC)
ON/OFF.
17. Orange/white
To lighting switch terminal.
18. Black (ground)
To vehicle (metal) body.
19. ISO connector
Note:
In some vehicles, the ISO connector may be
divided into two. In this case, be sure to
connect to both connectors.
20. Yellow/black
If you use a cellular telephone, connect it via the
Audio Mute lead on the cellular telephone. If not,
keep the Audio Mute lead free of any connections.
21. Speaker leads
White
: Front left
+
White/black: Front left
≠
Gray
: Front right
+
Gray/black : Front right
≠
Green
: Rear left
+
or Subwoofer
+
Green/black: Rear left
≠
or Subwoofer
≠
Violet
: Rear right
+
or Subwoofer
+
Violet/black: Rear right
≠
or Subwoofer
≠
22. Connecting cords with RCA pin
plugs (sold separately)
9. Multi-CD player
(sold separately)
23. Power amp
(sold separately)
23. Power amp
(sold separately)
24. Blue/white
To system control terminal of
the power amp (max. 300 mA
12 V DC).
25. System remote control
26. Blue/white (7*)
To Auto-antenna relay control terminal
(max. 300 mA 12 V DC).
27. Blue/white (6*)
28. The pin position of the ISO connector will differ
depends on the type of vehicle. Connect 6* and 7*
when Pin 5 is an antenna control type. In another
type of vehicle, never connect 6* and 7*.
29. Front speaker
29. Front speaker
30.
Left
31.
Right
32. Subwoofer
32. Subwoofer
33. Perform these connections when using
the optional amplifier.
Note:
Change the initial setting of this unit (refer
to the Operation Manual). The subwoofer
output of this unit is monaural.
6. TEL terminal
Refer to a Handsfree Telephone
Unit’s manual (sold separately).
CRD3719A_N 02.10.17 11:53 AM Page 17
