1 Press FUNCTION to select SCAN.
Press
FUNCTION
until
SCAN
appears in the
display.
2 Press
a
to turn scan play on.
SCAN :ON
appears in the display. The first 10
seconds of each track is played.
3 When you find the desired track press
b
to turn scan play off.
SCAN :OFF
appears in the display. The track
will continue to play.
#
If the display has automatically returned to
the playback display, select
SCAN
again by press-
ing
FUNCTION
.
Note
After scanning of a CD is finished, normal play-
back of the tracks will begin again.
Pausing CD playback
Pause lets you temporarily stop playback of
the CD.
1 Press FUNCTION to select PAUSE.
Press
FUNCTION
until
PAUSE
appears in the
display.
2 Press
a
to turn pause on.
PAUSE:ON
appears in the display. Play of the
current track pauses.
3 Press
b
to turn pause off.
PAUSE:OFF
appears in the display. Play will re-
sume at the same point that you turned pause
on.
Selecting the search method
You can switch the search method between
fast forward/reverse and searching every 10
track.
1 Press FUNCTION to select FF/REV.
Press
FUNCTION
until
FF/REV
appears in the
display.
#
If the search method
ROUGH
has been pre-
viously selected,
ROUGH
will be displayed.
2 Press
c
or
d
to select the search meth-
od.
Press
c
or
d
until the desired search method
appears in the display.
!
FF/REV
Fast forward and reverse
!
ROUGH
Searching every 10 track
Searching every10 track in
the current disc
If a disc contains over 10 tracks, you can
search every 10 track. When a disc contains a
lot of tracks, you can roughly search the track
you want to play.
1 Select the search method ROUGH.
Refer to
Selecting the search method
on this
page.
2 Press and hold
c
or
d
to search every
10 track in a disc.
#
If a disc contains less than 10 tracks, pressing
and holding
d
recalls the last track of a disc.
Also, if the remaining number of tracks after
searching every 10 tracks are less than 10, press-
ing and holding
d
recalls the last track of a disc.
Built-in CD Player
En
17
English
Section
05
HHHHHHHHHHHHHH
