Entering disc titles
Use the disc title input feature to store up to
48 CD titles in the unit. Each title can be up to
10 characters long.
1
Play the CD that you want to enter a
title for.
2
Use MULTI-CONTROL to select
TitleInput "A" in the function menu.
Refer to
Introduction to advanced operations
on page 15.
3
Press DISP/SCRL to select the desired
character type.
Press
DISP/SCRL
repeatedly to switch between
the following character types:
Alphabet (upper case), numbers and symbols
—
Alphabet (lower case)
—
European letters,
such as those with accents (e.g.
á
,
à
,
ä
,
ç
)
—
Numbers and symbols
4
Push MULTI-CONTROL up or down to
select a letter of the alphabet.
5
Push MULTI-CONTROL left or right to
move the cursor to the previous or next
character position.
6
Move the cursor to the last position by
pushing MULTI-CONTROL right after enter-
ing the title.
When you push
MULTI-CONTROL
right one
more time, the entered title is stored in mem-
ory.
7
Press BAND/ESC to return to the play-
back display.
Notes
!
Titles remain in memory, even after the disc is
removed from the unit, and are recalled when
the disc is reinserted.
!
After data for 48 discs are stored in the mem-
ory, data for a new disc overwrites the oldest
one.
!
If you connect a multi-CD player, you can
input disc titles for up to 100 discs.
!
When a multi-CD player that does not support
disc title functions is connected, you cannot
enter disc titles in this unit.
Operating this unit
En
17
English
Section
02
