2
Press MULTI-CONTROL to turn AUX1/
AUX2 on.
#
To turn AUX off, press
MULTI-CONTROL
again.
Setting the rear output and
subwoofer controller
This unit
’
s rear output (rear speaker lead out-
put and RCA rear output) can be used for full-
range speaker (
REAR SP :FULL
/
PREOUT :REAR
) or subwoofer
(
REAR SP :SUB W
/
PREOUT :SUB W
) connec-
tion. If you switch the rear output setting to
REAR SP :SUB W
, you can connect a rear
speaker lead directly to a subwoofer without
using an auxiliary amp.
Initially, the unit is set for rear full-range speak-
er connection (
REAR SP :FULL
). When rear
output is connected to full range speakers
(when
REAR SP :FULL
is selected), you can
connect the RCA subwoofer output to a sub-
woofer. In this case, you can select whether to
use the subwoofer controller
’
s (low pass filter,
phase) built-in
PREOUT :SUB W
or the auxili-
ary
PREOUT :REAR
.
1
Use MULTI-CONTROL to select
SW CONTROL in the initial setting menu.
Refer to
Adjusting initial settings
on the pre-
vious page.
2
Press MULTI-CONTROL to display the
setting mode.
#
Press
DISP/BACK/SCRL
to return to the pre-
vious display.
3
Use MULTI-CONTROL to select the de-
sired setting.
Press to switch the segment you wish to set
between left and right. Turn to change the set-
ting of each segment.
Left segment
Right segment
REAR SP
(rear speaker setting)
FULL
(full-range speaker)
SUB W
(subwoofer)
PREOUT
(RCA output setting)
SUB W
(subwoofer)
REAR
(full-range speaker)
#
When you select
REAR SP :SUB W
, you can
not set
PREOUT
(RCA output setting).
Notes
!
Even if you change this setting, there is no
output unless you turn the subwoofer output
on (refer to
Using subwoofer output
on page
27).
!
If you change this setting, subwoofer output
in the audio menu will return to the factory
settings.
!
Both rear speaker lead outputs and RCA rear
output are switched simultaneously in this
setting.
Switching the ever scroll
When Ever Scroll is set to ON, recorded text in-
formation scrolls continuously in the display.
Set to OFF if you prefer the information to
scroll just once.
1
Use MULTI-CONTROL to select
EVER SCROLL in the initial setting menu.
Refer to
Adjusting initial settings
on the pre-
vious page.
2
Press MULTI-CONTROL to turn the ever
scroll on.
#
To turn the Ever Scroll off, press
MULTI-CONTROL
again.
Activating the
BT AUDIO
source
You need to activate the
BT AUDIO
source in
order to use a Bluetooth audio player.
!
You can only operate this function when
Bluetooth adapter (e.g. CD-BTB200) is con-
nected to this unit.
Initial Settings
En
30
Section
04
