Adjusting equalizer curves
You can adjust the currently selected equalizer
curve setting as desired. Adjusted equalizer
curve settings are memorized in
CUSTOM
.
Adjusting bass/mid/treble
You can adjust the bass/mid/treble level.
1
Press AUDIO to select BASS/MID/
TREBLE.
2
Press
a
or
b
to adjust the level.
+6
to
–
6
is displayed as the level is increased
or decreased.
#
To return to the normal display, press
BAND
.
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1
Press AUDIO to select LOUD.
2
Press
a
or
b
to turn loudness on or off.
#
You can also turn loudness on or off by press-
ing and holding
EQ
.
3
Press
c
or
d
to select a desired level.
LOW
(low)
—
HI
(high)
#
To return to the normal display, press
BAND
.
Adjusting source levels
SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
!
Settings are based on the FM tuner volume
level, which remains unchanged.
!
The AM tuner volume level can also be ad-
justed with source level adjustments.
1
Compare the FM tuner volume level
with the level of the source you wish to ad-
just.
2
Press AUDIO to select SLA.
3
Press
a
or
b
to adjust the source vo-
lume.
SLA +4
to
SLA
–
4
is displayed as the source
volume is increased or decreased.
#
To return to the normal display, press
BAND
.
Other Functions
Adjusting initial settings
Using the initial settings, you can customize
various system settings to achieve optimal per-
formance from this unit.
1
Press SOURCE and hold until the unit
turns off.
2
Press SOURCE and hold until function
name appears in the display.
3
Press FUNCTION to select one of the in-
itial settings.
Press
FUNCTION
repeatedly to switch be-
tween the following settings:
Clock
—
AUX
(auxiliary input)
Use the following instructions to operate each
particular setting.
#
To cancel initial settings, press
BAND
.
#
You can also cancel initial settings by holding
down
SOURCE
until the unit turns off.
Setting the clock
Use these instructions to set the clock.
1
Press FUNCTION to select clock.
2
Press
c
or
d
to select the segment of
the clock display you wish to set.
Pressing
c
or
d
will select one segment of the
clock display:
Hour
—
Minute
3
Press
a
or
b
to set the clock.
Turning the clock display on or off
You can turn the clock display on or off.
Operating this unit
En
9
English
Section
02