Setting the rear output and
subwoofer output
This unit
’
s rear output (rear speaker leads out-
put and RCA rear output) can be used for full-
range speaker (
Rear SP :REAR
) or subwoofer
(
Rear SP :SUB W
) connection. If you switch
the rear output setting to
Rear SP :SUB W
, you
can connect a rear speaker lead directly to a
subwoofer without using an auxiliary amp.
Initially, the unit is set for rear full-range speak-
er connection (
Rear SP :REAR
).
1
Display the initial setting menu.
Refer to
Adjusting initial settings
on page 40.
2
Use MULTI-CONTROL to select REAR SP
in the initial setting menu.
3
Press MULTI-CONTROL to switch the
rear output setting.
Pressing
MULTI-CONTROL
will switch be-
tween
Rear SP :REAR
(full-range speaker) and
Rear SP :SUB W
(subwoofer) and that status
will be displayed.
#
When no subwoofer is connected to the rear
output, select
Rear SP :REAR
(full-range speaker).
#
When a subwoofer is connected to the rear
output, select
Rear SP :SUB W
(subwoofer).
Notes
!
Even if you change this setting, there is no
output unless you turn the subwoofer output
on (refer to
Using subwoofer output
on page
38).
!
If you change this setting, subwoofer output
in the audio menu will return to the factory
settings.
!
Both rear speaker lead outputs and RCA rear
output are switched simultaneously in this
setting.
Switching the ever scroll
When Ever Scroll is set to ON, recorded text in-
formation scrolls continuously in the display.
Set to OFF if you prefer the information to
scroll just once.
1
Display the initial setting menu.
Refer to
Adjusting initial settings
on page 40.
2
Use MULTI-CONTROL to select
EVERSCROLL in the initial setting menu.
3
Press MULTI-CONTROL to turn the ever
scroll on.
#
To turn the Ever Scroll off, press
MULTI-CONTROL
again.
Activating the
BT AUDIO
source
You need to activate the
BT AUDIO
source in
order to use a Bluetooth audio player.
This setting is set to on by default. If you do
not use
BT AUDIO
, you can turn it off.
1
Display the initial setting menu.
Refer to
Adjusting initial settings
on page 40.
2
Use MULTI-CONTROL to select
BT AUDIO in the initial setting menu.
3
Press MULTI-CONTROL to turn the
BT AUDIO source on.
#
To turn the
BT AUDIO
source off, press
MULTI-CONTROL
again.
Resetting the Bluetooth
wireless technology module
Bluetooth telephone and Bluetooth Audio
data can be deleted. To protect personal infor-
mation, we recommend deleting this data be-
fore transferring the unit to other persons. The
following settings will be deleted.
!
phone book entries on the Bluetooth tele-
phone
!
preset numbers on the Bluetooth tele-
phone
!
registration assignment of Bluetooth tele-
phone
!
call history of Bluetooth telephone
Initial Settings
En
42
Section
10